Valcom V1092 Manuals

Speaker Volume Controls permits adjusting speaker volume from a convenient wall mounted location. Embossed Markings From 0 To 10 Wall Mountable Single Gang Surface Mount Box Included Controls Volume Of Up To 150 One- way Speakers • • • • 800-VALCOM-1 (800-825-2661) • www.valcom.com Stainless Steel..........................................V-1092 White..........................................................V-2992-W Speaker Volume Controls s s NEW

VSP-V-1092 Issue 9 1 947092 V-1092 WALL MOUNT VOLUME CONTROL INTRODUCTION These instructions contain the specifications and information necessary to install, operate and maintain the V-1092, Wall Mount Volume Control. SPECIFICATIONS Purpose The V-1092, Wall Mount Volume Control, is a volume control unit which can be mounted into a single-gang electrical box. The V-1092 comes with its own surface mount box which provides 1/2" conduit access. This unit is compatible with all Valcom one-way and two-way speakers. NOTE: The V-1092 is not designed to connect directly to the output of high powered amplifiers. Applications • To control volume of one-way amplified speaker assemblies in inaccessible areas • To control large groups of one-way amplified speaker assemblies • To control volume of Valcom talkback speakers • Volume control for Valcom V-1039A, Explosion Proof Horn Dimensions/Weight • 4.50"H x 2.75"W x 2.80"D (11.43cm H x 6.99cm W x 7.11cm D) • Weight: .8 lbs. (.36 kg) INSTALLATION These instructions cover only the installation procedures for the Valcom V-1092. Consult the installation instructions of other equipment for information relative to each piece of equipment. Audio Connections "D" type station wire or other suitable pairs may be used for audio connections. Connections when using a One-Way Control Unit (Refer to Figure 1) a. Connect wall mount volume control input tip and ring to desired zone output leads from page control. b. Connect wall mount volume control output tip and ring to speakers. Connections when using a Talkback Control Unit (Refer to Figure 2) a. Connect wall mount volume control tip input terminal to tip output lead of talkback page control unit. b. Connect wall mount volume control tip output terminal to tip lead of talkback speaker. c. Connect ring output of talkback page control to ring of talkback speaker. Mounting Surface Mounting - Mount the V-1092 on any suitable surface. Two screws are used to fasten the box to the surface. Flush Mounting - Remove faceplate assembly and install in standard single-gang electrical box.

WALL MOUNT VOLUME CONTROL MODEL V-1092 TECHNICAL SPECIFICATIONS 5614 Hollins Road Roanoke, Virginia 24019 Phone: 540-563-2000 Fax: 540-362-9800 E-Mail: [email protected] www.valcom.com SPECIFICATIONS: FEATURES: BRUSHED STAINLESS STEEL PLATE EMBOSSED MARKINGS FROM 0 TO 10 WALL MOUNTABLE SINGLE GANG SURFACE MOUNT BOX INCLUDED CONTROLS VOLUME OF UP TO 150 ONE-WAY SPEAKERS DESCRIPTION: The V-1092 permits adjusting speaker volume from a convenient wall mounted location. The volume control features a stainless steel plate with embossed numbers and fits a single gang electrical wall box. The wall mount volume control controls volume of up to 150 one-way self-amplified speakers. CAPACITY: Controls volume of up to 150 one-way self-amplified speakers HOUSING AND FINISH: Brushed stainless steel single gang plate with raised number dial scale; skirted black knob and position indicator; includes stainless steel mounting box. MOUNTING: The V-1092 can be mounted in wall or on surface using a single gang electrical box. DIMENSIONS AND WEIGHT: 4.5” (11.43 cm) H x 2.75” (6.99 cm) W x 2.8” (7.11 cm) D Weight: 0.8 lb (.36 kg)