Valcom VIP-A12A Manuals

1 947765 Issue 4 IP PoE Surface Mount Analog Clocks VIP-A12A, 12” Round VIP-A16A, 16” Round INTRODUCTION The VIP-A12A 12 inch Round Analog and VIP-A16A 16 inch Round Analog Clocks enable time indication, synchronization, and correction over an IP-based LAN/WAN. This allows locating a clock display anywhere on the network. Clock synchronization can be programmed to sync with any NTP (Network Time Protocol) server. The enclosure is made of steel with a durable powder coated finish. The color of the enclosure can easily be changed to match any décor. Power is provided to the VIP-A12A and VIP-A16A via a Power over Ethernet (PoE) switch meeting the 802.3af specification. SPECIFICATIONS Features  RJ-45 network connection  Low-profile/semi-flush smooth surface metal case  Shatterproof, polycarbonate crystal  802.3af compatible  High Efficiency Precautionary Designations CAUTION: To reduce the risk of electric shock, Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. . DIMENSIONS/WEIGHT  VIP-A12A – 12.81” diameter x 1.20” depth Weight: 3.70 LBS  VIP-A16A – 16.81” diameter x 1.60” depth Weight: 5.35 LBS Nominal Power Requirements 4.5W via 802.3af PoE Environment Temperature: 0 to +45° C Humidity: 0 to 85% non-precipitating INSTALLATION FCC Information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference in which case the user will be required to correct the interference at one’s own expense.