Vaxcel T0436 Manuals

Page 1 /  6
180720
Important to Know:
1. If you are not familiar with state and local electrical
codes, it is recommended that you consult with a
qualified electrician.
2. This fixture requires a 120 VAC, 60 Hz power
source.
3. For general safety and to avoid any possible
damage to the sensor, be sure the power is
switched "off" before adjustment.
Maximum Wattage: 22 W
Working Temperature Range: - 4°F ~ 113°F
ASSEMBLY  AND  INSTALLATION
                INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
               2. READ AND SAVE THESE INSTRUCTIONS.
T0436
Features:
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Note: Fixture can be wall mounted only.
1. Energy saving LED fixture.
2. Motion sensor: turns light ON automatically when
    motion is detected and turns light OFF automatically
    when motion stops.
3. Photocell keeps the light OFF during daylight hours.
4. When in manual override mode, use wall switch
    to change the function and perform the function
    conversion.
Hardware Package (included):
Fixture Mounting Screw
X1
Mounting Strip
X1
Wire Connector
X3
Mounting Screw
X2
Wall Mounted
Read notes section on page 2 for additional
information about mounting location of fixture.
Light fixture should be mounted as shown when
installed.
Decorative Cover
X1