Vertex Standard GX1500S Manuals

Vertex Standard GX1500S Alignment manual (5 pages)

• Identifier: id-2093718
• Brand: Vertex Standard
• Device: Transceiver
• Type: Alignment manual, PDF
• Key Aspects: Accessories and Add-Ons Overview, Use Case Documentation, Environmental Impact Assessments
• UPD Date: 14.06.2026
• Source File: 2194138.pdf
• Pages: 5
• Description: Setup and usage guide for the Vertex Standard GX1500S. The manual details device calibration, performance optimization, power requirements.

Key Pages and Contents:

• FCC ID: K6630173X3D

  IC ID: 511B-30173X3D Alignment 2/5 Vertex Standard Co,. Ltd. Required Test Equipment ˆ RF Signal Generator with calibrated output level at 200 MHz ˆ Deviation Meter (linear detector) ˆ AF Millivoltmeter ˆ SINAD Meter ˆ Inline Wattmeter with 5% accuracy at 200 MHz ˆ Regulate

• FCC ID: K6630173X3D

  IC ID: 511B-30173X3D Alignment 5/5 Vertex Standard Co,. Ltd. Confirmation of Weather Alert Tone In the weather channel mode, when transceiver receives the specific emergency tone (1050 Hz), weather alert tone will be output (Weather Alert Operation). The Weather Alert mode will b

• FCC ID: K6630173X3D

  IC ID: 511B-30173X3D Alignment 1/5 Vertex Standard Co,. Ltd. GX1500S Alignment The GX1500S has been carefully aligned at the factory for the specified performance across the marine band. Realignment should therefore not be necessary except in the event of a component failure. All

• FCC ID: K6630173X3D

  IC ID: 511B-30173X3D Alignment 4/5 Vertex Standard Co,. Ltd. ˆ With the PTT switch pressed, adjust VR1003 so that the maximum deviation is ±4.4 kHz. ˆ Set the output of the audio generator (AG) to 100 Hz and 1 V. ˆ With the PTT switch pressed, adjust VR1004 so that the maximu