Videx VX2200 Manuals

66251980 - V1.2 - 31/07/21 - 1 - Kristallo Series Art. KRV72 - KRV74 - Installation instructions 112 42 155 182 29 A B D E C Fig. 1 Art. KRV72 front 120 190 8 39 189 119 C A B D Fig. 2 Art. KRV74 front ON ON SW2 SW1 Made in Italy KRV72 KRV74 /W (White) /B (Black) DOL SB AL LB L _ 12Vin 12Vout GND V2 V1 +20 +VD E F G Fig. 3 Art. KRV74 back DESCRIPTION Hands free video monitor for VX2200 digital system. 3.5” full colour active matrix LCD monitor. 4 LED’s related to the videophone operation. 8 capacitive touch sensitive backlight buttons: “answer/camera recall/push to talk/end conversation”, “door open/concierge call”, “service button“, “privacy/reject call” plus other 4 buttons for programming, adjustments and intercommunication facility (available only between the Kristallo range of videophones and intercoms) that enables intercommunication between devices in the same apartment (same PHONE ID but different extension address) or between devices installed in different apartments (different PHONE ID). Programming: number of rings, clean mode, service button and privacy service duration, melody type and volume, extension ID for intercommunication, backlight buttons. Adjustments: volume speech, picture brightness and hue. LEGEND A Microphone B Display C LED’s and touch buttons D Loudspeaker D Handset E Connection terminals F 4 Way dip switch bank G 8 Way dip switch bank OPERATION DURING STAND-BY BUTTON OPERATION PROGRAMMING See “Programming” on page 2 for details Camera recall Press a number of times equal to the ID value of the door panel to switch ON. When the connection is made, press again to end the call. Number of rings Press and keep pressed for more than 5 seconds to enter Number of rings programming mode. Call the concierge Press to book a call to the digital concierge if installed on the system. Clean mode Press and keep pressed for more than 5 seconds to enter in Clean mode. Service button Press to activate the service (if connected) for the pro- grammed time (SB terminal open collector output). Service button duration Press and keep pressed for more than 5 seconds to enter in Service button duration programming mode. Privacy service Press to enable the privacy service. The LED turns on. The service is deactivated by pressing again the same but- ton or when the programmed time expires. Privacy service duration Press and keep pressed for more than 5 seconds to enter Privacy service duration programming mode. Art. KRV72-KRV74 3.5” hands free videomonitor

66251435-EN - V1.1 - 15/10/16 1 VX2200 Digital System “6 Wire” BUS Video - “2 Wire” BUS Audio Art. CST2220 - Operating Instructions Art. CST2220 VX2200 IP Concierge Station GUI instruction sheet Fig. 1 CST2220 - VX2200 IP Concierge Station DESCRIPTION The Art.CST2220 is an IP Concierge station for VX2200 digital systems and is used in conjunction with the Art.2220 IP block interface. The unit consists of a Voip Android Phone having a 7” Capacitive Touch Display on which is installed the VIDEX concierge applica- tion. The CST2220 allows the connection to multiple Art.2220 devices, so one station can manage multiple system installations: the unit receives all the incoming calls from all the systems to which it is connected, each system can then be independently controlled by the concierge. For those familiar with the Art.2210 concierge the CST2220 includes all the functionality of this device with many additional features due to the advanced IP technology used in the Art.2220 interface. In a standard installation the CST2220 would connect to the same LAN as the Art2220 interface whoever it is also possible to configure communication via WAN to enable a re- mote concierge installation. The Art.CST220 includes the SERVER to elimination the requirement for an external server on small to medium installations. The application can be sub divided into four distinct sections fig.2 : the status section (cyan), the system management section (white), the action section (yellow) and the buttons section (magenta). The status section provide information concerning the system operation, the system management allows the management of calls (incoming or outgoing depend on the selection made through the call management buttons), the action section shows the possible actions on the active call and the buttons section allows the system settings, the call control (incoming call, outgoing call to apartments or doors) and, once an ac- tion is established, this area shows the necessary buttons to proceed with the conver- sation. Fig. 2 App information areas ENG

VX2200 Digital System “2 wire BUS” AUDIO - “6 wire BUS” VIDEO Technical Manual Italiano English Sistema Digitale VX2200 “BUS 2 fili” AUDIO - “BUS 6 fili” VIDEO Manuale Tecnico Edition 2013 Version 2.0 18/09/2013

TECHNICAL MANUAL EDITION 1.6 VX2200 DIGITAL SYSTEM