Vision VDA100SFHD Manuals

VDA100SFHD Full HD Vandal IR Dome Camera Power: 12VDC Option: IR illumination Dear Customers! By selecting this product, you have decided to use a professional device that guarantees highest quality and reliability. We would like to thank you very much for your confidence and kindly ask you to read the following instructions carefully before Installation and operation in order to take full advantage of all quality features regarding this product. INFORMATION This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at one’s own expense. WARNING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. CAUTION – To prevent electric shock and risk of the fire hazards -Do NOT use power source other than that specified. -Do NOT expose this appliance to rain or moisture. This installation should be made by a qualified service person and should conform to all local codes. Precautions Please read the manual carefully before installation in order to set up and use the camera correctly with best image quality. - Installation and services should be carried out only by authorized personnel according to local safety regulations. Limitation of liability This publication is provided “AS IS” without warranty of any kind, either express or implied, including but not limited to, the implied warranties of merchantability, fitness for any particular purpose, or non-infringement of the third party's right. This publication could include technical inaccuracies or typographical errors. Changes are added to the information herein, at any time, for the improvements of this publication and/or the corresponding product(s). Disclaimer of warranty In no event shall seller be liable to any party or any person, except for replacement or reasonable maintenance of the product, for the cases, including but not limited to below; (1) Any damage and loss, including without limitation, direct or indirect, special, consequential or exemplary, arising out of or relating to the product. (2) Personal injury or any damage caused by inappropriate use or negligent operation of the user. (3) Unauthorized disassemble, repair or modification of the product by the user’ (4) Inconvenience or any loss arising when images are not displayed, due to any reason or cause including any failure or problem of the product. (5) Any problem, consequential inconvenience, or loss or damage, arising out of the system combined by the devices of third party. (6) Any claim or action for damages, brought by any person or organization being photogenic subject, due to violation of privacy with the result of that surveillance- camera's picture, including saved data, for some reason, becomes public or is used for the purpose other than surveillance. Package Camera (x 1), Manual (x1), Ext-Video Cable (x 1), Torx Wrench (x 1), Template (x 1), Tapping screws and Anchors SET (x1), Junction box plate (x 1), O-Ring 3ea, Machine Screw (M4x12I, x 4), Machine Screw(M4x5L, x4) Installation Lens (Varifocal) Adjustment and 3-Axis Adjustment Installation example on the ceiling ① Paste a Drilling Template on the ceiling or wall and drill screw points which will be done for installation. ② Fix a Surface Mounting Base by using Tapping Screws with Ø4 provided. ③ Point a Camera 3D Gimbal to a desired direction and assemble a dome cover to the Surface Mounting Base with Torx Screws by using Torx Wrench provided. The lighting flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Motorized lens By OSD Switch or RS-485 EXT-Video & Zoom & Focus How to use Connect an Extra video output (BNC cable) to the camera and connect its BNC connector to the test monitor for adjustment. How to Zooom and Focus Push up or down the Tack SW (OSD Key) by finger for a second. Up  Zoom in Down  Zoom out Left/Right  Focus in/out Function and operation For use OSD menu, please connect the OSD control PCB (provide) to the connector Press the Tack SW (OSD Key) to open OSD menu. MAIN MENU LENS DC MANUAL EXPOSURE SHUTTER AGC SENS-UP BRIGHTNES S RETURN ACCE DEFOG BACKLIG HT WHITE BAL ATW AWC→SET INDOOR OUTDOOR MANUAL DAY&NIGHT AUTO COLOR B/W EXT NR 2DNR 3DNR LEVEL SMART NR RETURN SPECIAL CAM TITLE D-EFFECT MOTION PRIVACY RETURN LANGUAGE DEFECT RS485 VERSION ADJUST SHARPNESS MOTION OSD LSC RETURN NTSC/PAL RESET FACTORY RETURN EXIT Dimension(mm) Cables: Specification MODEL Full HD Vandal IR Dome Camera Sensor Device Sony 1/2.9” progressive scan CMOS, 2MegaPixel Total Pixels 2000(H) x 1241(V) 2.48 Megapixel Effective Pixels 1984(H) x 1105(V) 2.19 Megapixel Scanning System Progressive Scan Horizontal More than 1000 TVL S/N Ratio More than 52Db (AGC Off) Min. Illumination 1.0 Lux with Sens-Up x 2 (F1.2, 30IRE, AGC On) Shutter Speed 1/30s Default(Long Exposure Mode, ~1Sec) Video Output 1920x 1080 30p 1280x 720 60p (Mode Select) Video Output Format 1.485G/s, HD-SDI Output (SMPTE 292M) AV Output 1V p-p Composite. 75 Ohms Digital Output SDI Output Lens 3 ~ 10mm VF Auto Iris Mega Pixel Lens Control DC IRIS Lens Power Source 220mA/12VDC(IR Off) Operating Temp. -10°C ~ 50°C Storage Temperature -20°C ~ 70°C Operating Humidity Under 90% Non-condensing Measurement (mm) Refer to the dimension Weight ( Approx.) 1,200 g OSD 2D/3DNR, Sens-UP, Shutter Speed, Language (English, Japanese, Chinese), Privacy Mask, Motion Detection, White Balance, BLC, DEFOG, etc. IR Illumination LED Spectrum 850nm Viewable Distance Up to 20M at Moonless Night (w/IR illumination) Min. Illumination 0 Lux (with IR illumination) Power Consumption 220mA/12VDC(IR Off), 460mA/12VDC (IR On) – IR illumination * Specifications are subject to change without prior noitce for improvement.