Visonic Fully supervised wireless accessories Manuals

Visonic Fully supervised wireless accessories Accessories manual (30 pages)

• Identifier: id-252668
• Brand: Visonic
• Device: Visonic Fully supervised wireless accessories Accessory
• Type: Accessories manual, PDF
• Key Aspects: Installation Site Requirements, User Feedback Collection
• UPD Date: 02.08.2026
• Source File: 199546.pdf
• Pages: 30
• Description: Device operation guide for the Visonic Fully supervised wireless accessories. This documentation covers operating modes, safety guidelines, device safety checks.

Key Pages and Contents:

• NEXT PG2, NEXT-K9 PG2

  D-302758 5 4. MODIFY DEVICE SETTINGS This section describes how to configure the parameters of the PIR detector from the PowerMax10-G2 control panel. To Modify the PIR Detector Device Settings Refer to the PowerMax10-G2 Installer Guide and perform the procedure for Adding A Wir

• 5. MODIFY DEVICE SETTINGS

  This section describes how to configure the parameters of the siren from the PowerMax10-G2 control panel. To Modify the Siren Device Settings Refer to the PowerMax10-G2 Installer Guide and perform the procedure for Adding A Wireless Device (section 4.

• The technical documentation as required by the European Conformity Assessment procedure is kept at:

  UNIT 6 MADINGLEY COURT CHIPPENHAM DRIVE KINGSTON MILTON KEYNES MK10 0BZ. Telephone number: 0870 7300800, Fax number: 0870 7300801 VISONIC LTD. (ISRAEL): P.O.B 22020 TEL-AVIV 61220 ISRAEL.

• CONTACT SENSORS (MC-302 PG2)

  Supervised PowerG Magnetic Contact Device 1. INTRODUCTION The MCT-302 PG2 is a fully supervised, PowerG magnetic contact device. The device includes a built-in reed switch (that opens upon removal of a magnet placed near it). The MC-302 PG sends th