Vonets MINI300 Manuals

Vonets MINI300 Quick setting manual (8 pages)

• Identifier: id-888322
• Brand: Vonets
• Device: Vonets MINI300 Repeater
• Type: Quick setting manual, PDF
• Key Aspects: Remote Management Instructions, Practical Usage Examples, Glossary of Terms
• UPD Date: 25.04.2026
• Source File: 856236.pdf
• Pages: 8
• Description: Instruction guidebook for the Vonets MINI300. The manual provides technical details on system configuration, product maintenance, supported accessories, setup validation.

Key Pages and Contents:

• VONETS——MINI300 300M Mini WiFi Repeater

  6 2. Open the IE browser, enter http://vonets.cfg virtual domain name setting(VDNS). Remark: Enter domain name, then Enter, the login page will appear, the default admin and password is admin.  Scan Hotspots After entering the IE browser, the WiFi hotsp

• VONETS——MINI300 300M Mini WiFi Repeater

  3 Product Introduction: MINI300 supports two kinds of functions 1. WiFi Repeater （ MINI300) : is a functional device that assists the Internet communication gateway to expand wireless coverage area. It is mainly used for expansion of wireless network sig

• VONETS——MINI300 300M Mini WiFi Repeater

  7  Choose a correct WiFi signal, then click Next, the following interface will appear: 3. Enter the correct password, confirm it is correct one, then click Apply button.

• VONETS——MINI300 300M Mini WiFi Repeater

  4 Remark: 1. When you want to restore the factory default setting, please press RESET button on the product for 5 seconds, after blue light blink a few, it will reset automatically (it will take about 30 seconds).

Vonets MINI300 Product manual (14 pages)

• Identifier: id-1641346
• Brand: Vonets
• Device: Vonets MINI300 Network Hardware
• Type: Product manual, PDF
• Key Aspects: Practical Advice for Users, Additional Resources for Users
• UPD Date: 29.07.2026
• Source File: 1677383.pdf
• Pages: 14
• Description: Quick start guide for the Vonets MINI300. The manual covers procedures for setup, support details, device reset instructions, configuration options.

Key Pages and Contents:

• VONETS Series Product Manual

  Declaration Copyright © 2016 Shenzhen HouTian Network Communication Technology Co.Ltd All rights reserved, with retained ownership Without Shenzhen HouTian Network Communication Technology Co.Ltd written authorization, any company or personal can’t copy, writ

• 4) Set up the source WiFi hot spot password, extended WiFi hot spot SSID (the default

  configuration: The password of extended WiFi hot spot is the same as the source WiFi hot spot password) 5) Configure WiFi Transmit power (This is just fit for VAP11G-500, VAP11G-1000, VAP11G-2000)  The

• Step 2. Power on the device (Please refer to the supply parameters of table to power,this series product does not contain the power adapter from original factory,users need to buy power adapter according to supply parameters) Step 3. Connect to WiFi bridge hot spot

• General operation and common faults of VONETS series products

  1. How to reset to the factory default parameters? Power on the device, after 60 seconds, long press Reset button until 5 seconds, the green light will flash a few, then the device will automatically reset to the factory default