Weber Pellet Pro Stacker Ring Manuals

Weber Pellet Pro Stacker Ring Instruction manual (4 pages)

• Identifier: id-877566
• Brand: Weber
• Device: Grill Accessories
• Type: Instruction manual, PDF
• Key Aspects: Guidelines for Regular Maintenance, FAQs on Installation, Glossary of Terms
• UPD Date: 26.07.2026
• Source File: 866995.pdf
• Pages: 4
• Description: General instruction manual for the Weber Pellet Pro Stacker Ring. The guide outlines procedures for repair references, system checks, operating guidelines, technical specifications.

Key Pages and Contents:

• Pellet Pro® Stacker Ring for Weber

  WSM Grill Instruction Manual

• 3. Then, use a 10mm wrench to attach the stacker ring brackets to

  the Pellet Pro® Pellet Hopper with the 10mm bolts. 4. Use two pieces of tape in order to separate the backing of the heat resistant aluminum tape strips. Then take the strips of aluminum tape and cover the gap between the spacer ring

• 6. Connect the RTD wire ends.

  7. Place the spacer ring on the bottom portion of the WSM smoker and on top of that, the top portion of the WSM smoker.  Install the metal RDT grommet into the existing hole as shown. You will need to remove the bolt prior to installing the grommet. You are now ready

•  WSM Spacer Ring

   Pellet Pro® Pellet Hopper  Attachment Brackets  Fastenings  Pellet Hopper Support Leg  Extra Long RTD Probe  (4) Strips of Heat Resistant Aluminum Tape Tools Required:  Phillips Screwdriver  7/16” Wrench  10mm Wrench 1. Attach the br