XPR Access WS4-CONV Manuals

1 v. a1 WS4-CONV Converter Wiegand to RS485 NL This converter allows the connection of any type of reader (Wiegand, Data / Clock ISO2, Dallas and RS-232) to the local bus of the access units. The converter automatically adapts its inputs (D1/CLK/Dal and D0/DTA/Rx) to the reader’s output. • Current consumption without external elements : 30 mA • Output 13,8 Vdc : max. 300 mA • Tamper input • Dimensions (mm): 66 x 41 Jumper closed: Wiegand mode: disables the possibility to use a Wiegand keypad Jumper opened: Wiegand mode: a Wiegand keypad can be used on D0/D1 input; The Keypad must be configured in Single Key - 8 bits Wiegand - Nibbles Complemented Jumper opened: Address 0 Jumper closed: Address 1 Jumpers position Type Orange Red Green OFF Reader’s LEDs color 1 wire 2 wires 2 wires 2 wires 2 wires 2 wires 2 wires 2 wires 2 wires 1 wire To configure the behavior of the LEDS, check the reader’s manual and put the jumpers according to the table below. Reader’s LEDs configuration z: High impedance/three state LO: 0 Volts HI: +5 Volts 1. DESCRIPTION 2. SPECIFICATIONS 3. JUMPERS AND TERMINAL BLOCKS DESCRIPTION Address 0 Address 1 USER’S MANUAL ES DE EN FR IT