Xtralis OSID Manuals

Xtralis OSID Installation sheet (2 pages)

• Identifier: id-803694
• Brand: Xtralis
• Device: Measuring Instruments
• Type: Installation sheet, PDF
• Key Aspects: Setup Verification Steps, Device Configuration Guide, Device Safety Standards
• UPD Date: 17.08.2026
• Source File: 836492.pdf
• Pages: 2
• Description: Official user manual for the Xtralis OSID. This manual provides guidance on shutdown procedures, operating instructions, product maintenance, energy usage.

Key Pages and Contents:

• Initiate Training Mode:

  Once mounted, final system setup is achieved by initiating Training Mode: 1. Ensure that all the spheres of the Emitters/Imager are locked in place and externally-powered Emitters are powered. Emitters will emit a faint purple flash when powered up. 2. Apply power to th

• Installation Sheet - OSID Smoke Detection System

  Detach Detector Mounting Bracket from Front Cover. • To detach the unit from the Mounting Bracket (A), open the front cover and with a screwdriver push the lip backwards to then slide the unit up to detach from the Mounting Bracket • To provide ca

Xtralis OSID Installation sheet (2 pages)

• Identifier: id-871908
• Brand: Xtralis
• Device: Smoke Alarm
• Type: Installation sheet, PDF
• Key Aspects: Troubleshooting Information, Regulatory Compliance Information
• UPD Date: 20.06.2026
• Source File: 872653.pdf
• Pages: 2
• Description: Product usage manual for the Xtralis OSID. It details device setup and user preferences, wiring setup, product specifications.

Key Pages and Contents:

• The Americas +1�781�740�2223 Asia +852�2916�8894 Australia and New Zealand +61�3�9936�7000

  Europe, Middle East and Africa �+44�1442�242�330 6 7 Wire the Termination Card on the Imager and Emitters: Note:�This�step�doe

• Installation Sheet - OSID Smoke Detection System

  Detach Mounting Bracket and Front Cover. •� To�Detach�the�unit�from�the�Mounting�Bracket�(A),�open�the�front�cover�and�with�a�screwdriver�push�the� lip��backwards�to�then�slide�the�unit�up�to