Bobrick CompacDryer Installation Instructions Manual

5/8'' (16.5mm) Entry Point for Surface Mounted Wiring 8-3/32'' (205mm) 4-17/32'' (115mm) Mounting Base CL Horizontal Reference Horizontal Reference 3-15/16'' (100mm) 7-7/8'' (200mm) 4-11/32'' (110mm) Dati Elettrici Altezze Consigliate Per Il Montaggio Rimozione Della Carcassa Insta ...

Bobrick CompacDryer raCCorDement ÉLeCtrique, Couper L’aLimentation ÉLeCtrique. 7/8'' (22mm) 3-17/32'' (90mm) 3/4'' (18mm) Entry Hole for Between-Wall Wiring 5/8'' (16.5mm) Entry Point for Surface Mounted Wiring 8-3/32'' (205mm) 4-17/32'' (115mm) Mounting Base CL Horizontal Reference Horizontal Reference 3-15/16'' (100mm) 7-7/8'' (200m ...

Bobrick CompacDryer installation instructions CompacDryer™ surface-mounted hand Dryer ...................pages 2 & 3 instrucciones para instalación De secadores De manos para montar sobre pared Bobrick CompacDryer™ .......................................................................... ...

Verificación De La Operación Del Secador Mantenimiento Garantía Page 5 aDVertenCia: 1. DesConeCtar La aLimentaCiÓn De reD antes De haCer CuaLquier traBaJo De reVisiÓn o mantenimiento DeL seCaDor. 2. no operar eL seCaDor sin tener La CuBierta instaLaDa. 1. Se debe limpiar la cubierta con un paño húmedo para quitar cualquie ...

Der eLeKtrisChen ansChLÜsse ist Die stromVersorGunG aBZusChaLten. Der troCKner muss GeerDet sein. 7/8'' (22mm) 3-17/32'' (90mm) 3/4'' (18mm) Entry Hole for Between-Wall Wiring 5/8'' (16.5mm) Entry Point for Surface Mounted Wiring 8-3/32'' (205mm) 4-17/32'' (115mm) Mounting Base CL Horizontal Reference Horizontal Reference 3-1 ...

Bobrick CompacDryer Maintenance Warranty Page 3 1. Fit cover over mounting base. NOTE: Four sides of cover overlap the mounting base and should be flush with the sides, top and bottom of the mount- ing base. 2. Replace and tighten three screws, one on each side and one on the bottom to secure cover to mounting base. 1. Turn electrical power ...

Bobrick CompacDryer maKinG eLeCtriCaL ConneCtions. Dryer must Be GrounDeD (eartheD). 7/8'' (22mm) 3-17/32'' (90mm) 3/4'' (18mm) Entry Hole for Between-Wall Wiring 5/8'' (16.5mm) Entry Point for Surface Mounted Wiring 8-3/32'' (205mm) 4-17/32'' (115mm) Mounting Base CL Horizontal Reference Horizontal Reference 3-15/16'' (100mm) 7- ...

Bobrick CompacDryer reD antes De haCer Las ConeXiones eLÉCtriCas. eL seCaDor tiene que estar ConeCtaDo a tierra. 7/8'' (22mm) 3-17/32'' (90mm) 3/4'' (18mm) Entry Hole for Between-Wall Wiring 5/8'' (16.5mm) Entry Point for Surface Mounted Wiring 8-3/32'' (205mm) 4-17/32'' (115mm) Mounting Base CL Horizontal Reference Horizontal Refer ...

Bobrick CompacDryer 200 Commerce Drive, Clifton Park, NY 12065-1350, Telephone: (518) 877-7444, FAX: 518-877-5029 11611 Hart Street, North Hollywood, CA 91605-5882: (818) 503-1672, FAX: 818-503-9287 100 Bobrick Drive, Jackson, TN 38301-5625, Telephone: (731) 424-7000, FAX: 731-424-7800 in Canada: BoBriCK Washroom equipment ...

Bobrick CompacDryer Prüfen Des Trocknerbetriebs Wartung Warranty Page 7 WiChtiG BesChrÄnKe Garantie aufheBen installationsdatum: ________________________________________________________________________________________________________________ seriennummer(n).: _____________________________________________________________________________________ ...