Océ cm4521 Manual 

– From the Print screen, Finishing settings and settings such as the number of copies can be specified. – To print multiple saved data at the same time, touch [Combine]. Up to 10 documents can be printed at the same time. For details, re ...

Océ cm4521 and various keys, such as the [Start] key and the [Stop] key. The operations that can be performed with these keys are described below. In this manual, [ ] indicates keys on the control panel and buttons in the touch panel ...

2-28 cm4521 Useful copy operations Chapter 2 ! Detail A maximum of 30 copy programs can be registered. Recalling a program 1 2 1 2 ...

3 cm4521 3-11 Useful fax operations Chapter 3 Selecting a registered destination ! Detail A maximum of 605 destinations can be specified. Destinations can be specified in the following combination. Address book: 500 destinations Direct input: 100 destinations Direct input e-mail addresses: 5 destinations 2 Note For details, refer to cha ...

Oc̩ cm4521 РLift up the paper take-up roller, and then load the paper so that the surface to be printed on faces upward. РDo not load so many pages that the top of the stack is higher than the , mark. РTray 3 can be loaded with up to 1,500 sheets of plain paper. Tray 4 can be loaded with up to 1,000 sheets of plain p ...

Océ cm4521 1 2 1 2 ...

Oc̩ cm4521 Paper can be fed manually through the bypass tray when you wish to print onto paper of a size that is not loaded into a paper tray, or when you wish to print onto label sheets or other special paper. Follow the procedure described below to load paper into the bypass tray. 1 Open the bypass tray. РWhen loading ...

Océ cm4521 2 cm4521 2-33 Useful copy operations Chapter 2 A single copy is printed. Check the proof copy. ...

Océ cm4521 2 cm4521 2-27 Useful copy operations Chapter 2 2.11 Easily recalling frequently used functions Registering/recalling programs Frequently used functions can be registered as a copy program. The registered copy program can easily be recalled and used. Registering a program First, specify the functions to be registered. 1 2 ...

Océ cm4521 4 cm4521 4-15 Useful scanning operations Chapter 4 Adding the date and time The date and time of scanning can be added to a document to be sent. ...

Océ cm4521 Loading paper into tray 1 and tray 2 Follow the procedure described below to load paper into tray 1 and tray 2. 1 Slide the lateral guides to fit the size of paper to be loaded. ...

Océ cm4521 This machine has two power controls: the main power switch and the [Power] (auxiliary power) key. Main power switch This switch turns on/off all functions of the machine. Normally, the main power switch is turned on. [Power] (auxiliary power) key Press to turn on/off machine operations. When turned off, the machine ente ...