Interface MCA-E4852A Operation & User’s Manual

-13- Interface Corporation Chapter 6 Glossary 6.1 List of Definitions The list below explains a selection of technical terms used in this manual. Term Definition CAN CAN is an acronym for Controller Area Network. Standardized by ISO as a serial communications protocol, CAN was developed by the German electrical equipment manufacturer, B ...

Interface MCA-E4852A -9- Interface Corporation 3.5 CAN Controller Access 3.5.1 Basic Mode The CBI-4852A can directly access all registers of the SJA1000 CAN controller. Moreover, an interrupt request is issued for CardBus by the controller interrupt signal. Basic CAN mode and Peli CAN mode are selectable. • Basic CAN mode It is the mode with the convention ...

Interface MCA-E4852A -7- Interface Corporation 3.2 Electric Characteristics The lists below show the electric characteristics of the CBI-4852A. Absolute Maximum Rating Item Min. Max. CANH, CANL input voltage -8 V +18 V CANH-CANL input potential difference -1.0 V +5.0 V Recommended Operating Environment Item Min. Max. CANH input voltage 2.0 V 4.5 V CANL input ...

Interface MCA-E4852A Interface Corporation -4- 1.2 Optional Products 1.2.1 Accessories Part Number Description GPC-4851 (Japanese) Driver software for Windows XP/2000/Me/98 GPF-4851 (English) Driver software for Windows XP/2000/Me/98 GPG-4851 (Japanese) Driver software for Linux, RTLinux, SH-Linux, and SH-RTLinux GPH-4851 (English) Driver software for Linux, ...

Interface Corporation -16- Chapter 8 Troubleshooting 8.1 Checkpoints Problem Solution Double-check all cable connections. Set up your equipment to meet the timing characteristics of this board, such as data setup time, and input/output response time. Data cannot be transferred correctly. If the power requirements exceed the system power ...