JK Audio ComPack Operation & User’s Manual

FCC Registration Your new JK Audio product has been registered with the Federal Communications Commission (FCC). This product complies with the standards in Part 68 of the FCC rules. 1. Connection and use with the nationwide telephone network The FCC requires that you connect this telephone equipment to the n ...

JK Audio ComPack 3 Getting to Know Your ComPack 4. Power Switch The power switch should be left in the position any time the unit is not being used or battery drain will occur. The unit will retain a phone line connection if the power switch is turned off during a call. 5. Phone Line Switch When using the analog jack, this switch acts ...

Yes, the ComPack has a DC blocking cap so it will not be damaged if connected to a powered line, although DC power is not necessary for operation. You must switch the Male XLR Function switch to for proper operation. 9. I’ve lost the power supply for my ComPack. I have another power supply tha ...

JK Audio ComPack Setting Up 1. Connect your microphone (and/or line input) and headphones to the input and output jacks on ComPack. 2. There are 3 ways to connect the ComPack to the phone line: A. For Analog Phones: Connect the jack marked to any standard analog telephone line. B. If there is no access to an Analo ...

JK Audio ComPack lines, PBX systems, even cell phones. Perfect for Remote Broadcasts, IFB feeds, or interviews over any phone connection. Wireless Phones and Notebooks. Simply plug ComPack into the 3.5mm headset jack of your wireless phone or notebook computer using the ...

JK Audio ComPack HD Voice Compatible (7 kHz Wide- Band Speech) Works with Analog and Digital PBX or VoIP Phones 4-conductor 3.5mm Headset Interface Connects to Wireless Phones & Notebooks Headphone, Mic, and Line Input Level Controls XLR Mic Input (Mic/Line Switch) XLR Line Output / Com Link 3.5mm Stereo Line Input ¼” Ster ...

JK Audio ComPack 15 FCC Part 15 Subpart A Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gene ...

JK Audio ComPack carries the CE marking accordingly: LVD 2006/95/EC (Safety) R&TTE 1999/5/EC (Telecom) EMC 89/336/EEC (ESD immunity) RoHS Directive 2015/863 The Technical File containing supporting documentation is maintained at: JK Audio, Inc (Corporate Headquarters) Compliance Manager 13 ...

1311 E 6th St. Sandwich, IL 60548 United States Telephone: 815.786.2929 Toll Free: 1.800.jkaudio Fax: 815.786.8502 www.jkaudio.com © 2019 JK Audio, Inc. All rights reserved. ComPack™ Universal Telephone Audio Interface User Guide Version 7/3/19 JK Audio ...

JK Audio ComPack ComPack also functions as a simple “no-frills” telecom link for your beltpack intercom system. ComPack will provide bi-directional audio on pin 3 of the male XLR jack to any industry standard intercom beltpack system. ComPack does not provide power over this XLR jack nor does it require power from the loop. Note: ComPack will no ...

JK Audio ComPack Technical Information Hybrid Transformer Isolation Transformer 1/4" Headphone Jack Intercom Link Line Output Switch Selects XLR Function 1/4" TRS Cellular Interface RJ-22 Handset Jack RJ-11 Phone Line Jack Ring LED Headset Emulator Circuit Universal PBX Interface ABC Switch Hybrid Transformer DTMF Keypad Clip ...

JK Audio ComPack 2 Front, Top, Bottom 3 Left, Right 2 Getting Connected 6 Operation 6 Telecom / Intercom Link 7 FAQs 8 Technical Information 10 Contents iii Contents Limited Warranty The ComPack is covered by a 2 year warranty to be free from defective workmanship and materials. To obtain service, contact JK Audio by phone o ...