HTP TIMER-DIG Installation Instructions

Tel.+39.035.692509 - Fax.+39.035.203291 - http://www.webhtp.com - [email protected] HTP part number: TIMER-DIG Digital Timer Technical data Product type Digital timer Max.Current 1A Current consumption 4mA max Supply Voltage 24...240V AC/DC Housing material ABS V0 Connection DIN43650 ...

HTP TIMER-DIG 4) Press the “test/enter” button to confirm your choise 5) You can change the pre-set values to anything ranging from 0.5 min to 99 min. for the OFF time. To change the OFF time simply press the right ‘off’ button for 3 sec. and ‘min’ will start flashing y on the display. The previously set OFF time will a ...

1) Connect the DIN connector back on to the timer as illustrated and make sure the gasket is securely in place and tighten the screw (max.1Nm) The unit will be IP65 when properly installed. 2) Switch ON the power. Note: the voltage must comply with the voltage mentioned on the coil 3) When the uni ...

HTP TIMER-DIG Page 2 Installation instructions (part 1 of 2) Page 3 Installation instructions (part 2 of 2) Page 4 Technical specifications SAFETY and PROPER USAGE To ensure safe and enduring performance of this product, you must comply strictly with the instructions enclosed herein. Non- compliance with instru ...