Leadshine Technology M880A Operation & User’s Manual

Tel: +086 0755-26434369 11 Web Site: www.leadshine.com 10. Sequence Chart of Control Signals In order to avoid some fault operations and deviations, PUL, DIR and ENA should abide by some rules, shown as following diagram: Figure 11: Sequence chart of control signals Remark: a) t1: ENA mus ...

Tel: +086 0755-26434369 13 Web Site: www.leadshine.com Problem Symptoms and Possible Causes Symptoms Possible Problems No power Microstep resolution setting is wrong DIP switch current setting is wrong Fault condition exists Motor is not rotating The driver is disabled Motor rotates in th ...

Leadshine Technology M880A Tel: +086 0755-26434369 5 Web Site: www.leadshine.com Figure 4: Connection to PNP signal (common-cathode) 5. Connecting the Motor The M880A can drive any 2-pahse and 4-pahse hybrid stepping motors. Connections to 4-lead Motors 4 lead motors are the least flexible but easiest to wire. Spee ...

Leadshine Technology M880A Tel: +086 0755-26434369 7 Web Site: www.leadshine.com Parallel Connections An 8 lead motor in a parallel configuration offers a more stable, but lower torque at lower speeds. But because of the lower inductance, there will be higher torque at higher speeds. Multiply the per phase (or unip ...

Leadshine Technology M880A 1. Introduction, Features and Applications.................................................................... 1 Introduction........................................................................................................... 1 Features ....................................................................................... ...