primatech Q180 Operating Instructions Manual

Consult our on-line Technical Support site at www.primatech.ca/support for updated documents and more tips. TO PREVENT INJURY, ALWAYS DISCONNECT THE AIR SUPPLY HOSE WHEN ADJUSTING, SERVICING OR DISASSEMBLING THE TOOL. FIRST: CHECK THE COMPRESSED AIR SU ...

primatech Q180 Q180 OPERATING INSTRUCTIONS WARNING Read these instructions thoroughly before using this tool and keep it handy for reference. Rev. 05/19 Printed in Taiwan ...

primatech Q180 To ensure maximum performance and efficiency, and also a minimum of care, this PRIMATECH pneumatic stapler requires clean, dry air. It is necessary to use a filter and a pressure regulator. This tool needs a detachable male coupler with 1/4" NPT male treads. The use of a 1/4" (1 cm) diameter air supply hose is recommended. A sm ...

The fastener position can be adjusted to accommodate the thickness of the flooring. The shoe adjustment feature provides close control of the fastener positioning to reduce occurrence of split tongues or dimples in the flooring surface. 1. Loosen both knobs (425) until top shoe (404) and bottom shoe move freely. 2. Position t ...

primatech Q180 a) Check for jammed fastener or obstruction. b) Check gate/foot and end of magazine for damages or burrs. c) Check the driving blade. d) Inspect the head assembly and check all seals; clean & lubricate. e) Check the rubber band around the cylinder. f) Check that the bumper is in place. BROKEN OR WORN DRIVING BLADE Replace the dr ...