Prexiso P60LC Instrument Set-up

first target point. 3 4 Aim laser at second target point. Aim laser at first target point. Aim laser at second target point. 5 Aim laser at third target point. 6 78.694 m 3 7 i The result is shown in the main line and the measured distance above. Prexiso P60LC Pythagoras(2-point) 90° 1 2 3 4 The result is ...

Prexiso P60LC and the measured distance above. Inclination measurement is used to measure a slope or incline (e. g ofstairs, railings, when fitting furniture, laying pipes, etc. ) EN Prexiso P60LC 7 Angle Measurement 1 2 ON 3 40.8 º 36.0 º ...

Prexiso P60LC must ensure that all users understand these directions and adhere to them. Symbols used The symbols used have the following meanings: WARNING Indicates a potentially hazardous situation or an unintended use which, if not avoided, will result in death or serious injury. CAUTION Indicates a poten ...

Prexiso P60LC Instrument Set-up ------------------------------ 2 Overview--------------------------------------------- Display--------------------------------------------------- Insert batteries ---------------------------------------- 2 2 2 Operations ---------------------------------------- 3 Switching ON/OFF ----------------------------------- Un ...

Prexiso P60LC instrument: It is a Class 2 laser product in accordance with: Do not stare into the laser beam or direct it towards other people unnecessarily. Eye protection is normally afforded by aversion responses including the blink reflex. Laser Class 2 products: IEC60825-1 : 2014“Radiation safet ...

Prexiso P60LC read through carefully before the product is used for the first time. The person responsible for the product must ensure that all users understand these directions and adhere to them. Display Insert batteries + + - - i Change batteries when battery symbol is empty. Prexiso P60LC ...

Prexiso P60LC Responsibilities of the person in charge of the instrument: • To understand the safety instructions on the product and the instructions in the User Manual. • To be familiar with local safety regula-tions relating to accident prevention. • Always prevent access to the product by unauthorised personnel ...

Prexiso P60LC is valid for measurements on white, diffusive, reflective targets up to 5 m at low ambient light and moderate temperatures. For distances greater than 5 m, the measurement uncertainty could increase additionally by 0.1 mm/m. In unfavourable conditions (such as bright sunlight, targets wit ...

Prexiso P60LC ON OFF Device is turned OFF. 5 sec i If no key is pressed for 120 sec, the device switches off automatically. If the info icon appears with a number, observe the instructions in section "Message Codes". Example: Unit setting Switch between the following units: Prexiso P60LC OFF OFF C UNITS Change the measurement reference ...

second target point(Perpen- dicular to the measuring surface). 90° 4 Aim laser at third target point. 5 The result is shown in the main line and the measured distance above. 4x 58.868 m 4 The result is shown in the mai ...

Prexiso P60LC Measuring single distance 1 Aim active laser at target. 2 59.99 m 3 i Target surfaces: Measuring errors can occur when measuring to colourless liquids, glass, styrofoam or semi-permeable surfaces or when aiming at hight gloss surfaces. Against dark surfaces the measuring time increases. Continuous measuring 3 sec 1 2 The larges ...