Nextech DC1103 Operation & User’s Manual

Nextech DC1103 Channel 2 476.4500 Duplex - Repeater Output Channel 3 476.4750 Duplex - Repeater Output Channel 4 476.5000 Duplex - Repeater Output Channel 5 476.5250 Duplex - Repeater Output (Emergency use only) Channel 6 476.5500 Duplex - Repeater Output Channel 7 476.5750 Du ...

Nextech DC1103 The device is in “Reception” mode when it is turned ON and not transmitting. When a signal is received on the current channel, the LCD will display receiving icon. When you press the PTT (push to talk) button, the device switches to “Transmission” mode. Hold the device in a vertical position with the Mic (mic ...

Nextech DC1103 Press the MENU button twice, the current CTCSS code will flash on the display. Press the up▲ /down▼ button to change the 38 available codes. Press the PTT button to confirm and return to stand-by mode. This license free radio operates on the 476MHZ frequency band; the device has 80 available radio channel ...

Press the call button one time quickly, the call tone will be transmitted on the set channel. 12. Roger Beep On/Off: After the PTT button is released, the device will send out a roger beep to confirm that you have stopped talking. Press the MENU button 6 times, “RO” will be displayed. Press the UP▲/Down▼ button to set the rog ...

Nextech DC1103 in any way. • Do not use the device in a potentially explosive setting (e.g. Around pumps, on the lower deck of a boat or around a fuel-storage installation or chemical products) If traveling in a car or by bike, stop before using the device. • Swit ...

Nextech DC1103 Press and hold the UP ▲ button for 2 seconds: The “SCAN” function indicator will appear on the display and the channel will scan continuously. Once an active channel is found, the scanning will stop and you can listen to the transmission. When the transmission has stopped on that channel, the scan function will ...

Nextech DC1103 6. Down Button 7. Call Button 8. Speaker 9. Up Button 10. Menu Button 11. Power ON/OFF Button 12. PTT (Push to Talk) Button 13. Belt Clip 14. Charger/Headset Jack 15. Receiving Icon 16. Transmitting 17. Volume Icon 18. Scan Icon 19. Lock Icon 20. Battery Level Indicator 21. Channel Number ...

When the device has not been used for 6 seconds, economy mode is automatically activated. This does not affect the reception or transmission of the radio. Standby mode is automatically re-activated as soon as a signal is detected. 16. Built-in Flash Light Your device has a built-in flash light that can be used for sending light si ...

1. Turning the Device ON/OFF Switch on the Device: Press and hold the Power Button for 3 seconds then you will hear a beep sound. Switch off the device: press and hold the Power Button for 3 seconds then you will hear a beep sound. 2. Adjusting the Volume To increase the volume, press the ▲Up Button; press the ▼Down Button to decrease t ...

Channel 36 477.3000 Repeater Input Channel 37 477.3250 Repeater Input Channel 38 477.3500 Repeater Input Channel 39 477.3750 Simplex Channel 40 477.4000 Simplex Highway Channel Channel 41 476.4375 Duplex - Repeater Output Channel 42 476.4625 Duplex - Repeater Output C ...

Radio Communications (Citizen Band Radio Stations) Class License and in New Zealand by MED General User Radio License for Citizens Band Radio. Operation is subject to conditions contained in those licenses. This lightweight hand-held transceiver is suitable for all manner of recreational ...