Axis P1346 Operation & User’s Manual

Unit connectors Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet. Using shielded cables is recommended. Power connector - 2-pin terminal block used for power input. Audio in (pink) – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal ...

Axis P1346 Ports & Devices I/O Ports AXIS P1346/-E/AXIS P1347 has one input and one output port. for connection of external devices. The ports can be given descriptive names and their Normal states can be configured as Open circuit or Grounded circuit. See Unit connectors, on page 45, for information on how to connect extern ...

Axis P1346 Note: To receive synchronized video in H.264 and audio, it is recommended that the time settings in the camera and client computer are synchronized with an NTP Server. This is enabled in the camera under System Options > Date & Time. Please refer to the help pages for more information. Click to access the online he ...

standard in Europe. PAL delivers 625 lines at 50 half-frames/second. Ping - Ping is a basic network program used diagnostically to check the status of a network host or device. Ping can be used to see if a particular network address (IP address or host name) is occupied or not, or if the host at that address i ...

Axis P1346 Simplex - In Simplex operation, a network cable or communications channel can only send information in one direction. SMTP (Simple Mail Transfer Protocol) - SMTP is used for sending and receiving e-mail. However, as it is ‘simple,’ it is limited in its ability to queue messages at the receiving end, and is ...