Bacharach Microprocessor Module Replacement Kit Instruction Manual

3015-5576 Rev 2 5 Figure 4. Microprocessor Module Removed from PAGM Main Board 6. Installing the New Microprocessor Module Install the new microprocessor module by following the steps below. Depending on your hardware and the replacement kit that you receive, there are two different insta ...

3015-5576 Rev 2 3 Front Remove Screws (3) Rear Remove Screws (3) Right Side Remove Screws (2) Figure 1. Disassembling the PAGM: Screw Locations 5. Remove the Microprocessor Board Prepare to remove the old microprocessor module by following the steps below. Items Required:  Scissors or ...

Bacharach Microprocessor Module Replacement Kit 3015-5576 Rev 2 7 NOTE : As a guide, align the larger hole on the microprocessor module with the top of the snap-in spacer. If aligned properly, the pins will align with the main board socket and the hole in the microprocessor board will align with the top connector of the snap-in spacer. ...

Bacharach Microprocessor Module Replacement Kit 2 3015-5576 Rev 2 WARNING: Failure to comply with these instructions may void the warranty. 3. Procedure Summary All system settings and configuration settings are returned to factory default values after this upgrade. You may choose to manually record your system settings and configurati ...