Bacharach Microprocessor Module Replacement Kit Instruction Manual

3015-5547 Rev 4 3 e. Locate the microprocessor module, socketed on the bottom right side of the main circuit board. Refer to Figure 1. f. Note the orientation of the module, specifically the gold tab and hole oriented on the bottom left of the board. Refer to Figure 2. Figure 1. Locations o ...

Bacharach Microprocessor Module Replacement Kit 2 3015-5547 Rev 4 NODE ADDRESS = _________ NUMBER OF ZONES = __________ ZONE (From screen) LOCATION (Based on your physical installation) GAS LENGTH OF TUBING TEMP AT ZONE STORED ALARM LEVELS LEAK LEVEL SPILL LEVEL EVAC LEVEL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4. Removal Preparation Prepa ...

Bacharach Microprocessor Module Replacement Kit 12 3015-5547 Rev 4 i. Use the LEFT and RIGHT arrow keys to scroll through all Zone Setup Screens. j. Select and change the zone settings as required or as recorded earlier in the table on page 2. The zone settings are: • LOCATION • LOG INTERVAL • REFRIGERANT • LEAK LEVEL • DISTANCE ...

1 621 Hunt Valley Circle New Kensington, PA 15068 3015-5547 Tel: 724-334-5000 Revision 4 Fax: 724-334-5001 May 17, 2013 Microprocessor Module Replacement Kit for Multi-Zone Leak Monitors Instruction Manual 1. Scope The Bacharach Multi-Zone family of fixed point monitors is designed for easy maintenance and enhancement. One element of that de ...

Bacharach Microprocessor Module Replacement Kit 3015-5547 Rev 4 11 d. Use the UP and DOWN arrow keys to select the NUM ZONES INSTALLED setting and press ENTER. e. Use the UP and DOWN arrow keys to choose the number of physical zones (solenoids) installed in your Multi-Zone (i.e., 4, 8, 12, or 16 zones). Press ENTER to save the changes, or ...