Digisol DG-WM2003SIE Operation & User’s Manual

7 2. Connect Wireless AP Router with PC You can connect the PC with wireless AP Router by Wireless SSID and LAN cable: The diagram of wireless connection showed as follow: Pls note: the default SSID is DG-WM2003SIE, SSID’s password is blank P3. Connect the PC to AP Router using WiFi as shown above P4. Connect the PC to AP Router us ...

Digisol DG-WM2003SIE INDEX 1. Hardware and Operation Mode Instruction……………........…………………….......………………………………4 1.1. LED indicator:………………………………………….......………………………………………………………..…….4 1.2. AP Router Interface:…………………� ...

Digisol DG-WM2003SIE 22 4.3. Advanced Setting In advanced setting you can get wireless AP Router’s device status, Wireless setting, Network setting and AP management configuration. Let’s click Advanced Setting in status page, will show Return home, Setup Wizard which we showed before. Let’s see more in Device Status, Wireless, Network and Managemen ...

Digisol DG-WM2003SIE 8 3. Login 1. Connect the Ceiling AP Router with computer by wired or wireless 2. The default IP address of this wireless AP Router is 192.168.1.200. Configure the PC’s local connection. IP address as 192.168.1.X (X is number from 2 to 254), subnet mask is 255.255.255.0. P5 P6 ...

Digisol DG-WM2003SIE 21 P27: LAN setting in AP mode Please Note: The equipment will restart automatically for the changes to take effect. P28: Status in AP mode ...

18 4.2.3. WISP Operation mode Click WISP operation mode in Wizard, then will pop up the configure page, please set the WISP operation mode based on the steps shown in picture: P22: WISP mode Select the appropriate wireless AP and configure the correct WAN setting in WISP operation mode, then next to complete. Please Note: The equipme ...

Digisol DG-WM2003SIE 26 4.3.5. Advanced Settings This page, will show the regional info, mode, RF Power, Max user access,etc. P36: Advanced Setting 4.3.6. Network Setting In network, you can configure LAN setting and tag VLAN as follow: In LAN Settings, mainly including Static IP and DHCP. P37: LAN Setting ...

Digisol DG-WM2003SIE 4 1. Hardware and Operation Mode Instruction Package Contents Before using this access point, please check if there is anything missing in the package, and contact your dealer of purchase to claim for missing items:  DG-WM2003SIE Ceiling Mount AP Router  DC 12V Power Adapter  Patch Cord  User Manual CD  Mounting Screws ...

Digisol DG-WM2003SIE 14 P15: Wireless setting in Gateway mode Please note: to make the device work in some clear channel, user can click wireless analyzer at first. Check Less AP in the channel, and then select your channel accordingly, then Wireless performance will be more stable. Picture shown as below: P16: Wireless Analyzer ...

28 Upgrade Fimrware:- Browse the fimrware file and click on upgrade. Wait till the upgrade is successfull. The device will reboot automatically and successfull firmware upgrade. P40: Firmware Upgrade System:- You can save the config or restore the previously saved config or reset the device to its default config. P41: System ...

Digisol DG-WM2003SIE COPYRIGHT Copyright 2017 by Digisol Systems Ltd. All rights reserved. Company has an ongoing policy of upgrading its products and it may be possible that information in this document is not up-to-date. Please check with your local distributors for latest information. No part of this document can be copied or reproduced in any form wi ...

Digisol DG-WM2003SIE 10 4. WEB GUI interface Setting 4.1. Status After login, the Device Status and home page will be showed P9: Device Status This page, show the device default operation mode, channel, end user QTY, connection status, CPU usage status, Wireless, LAN and AP location info. Then in Wireless Setting, GUI configuration page shown as below: U ...