Geo Cosy Setup Manual

If you have a hot water tank with a Y or S plan system (see right) Cosy can also be used to control your hot water. To control the hot water please purchase a hot water extension pack. The switch is a mains powered switch ...

Geo Cosy Things you can do before the switch is installed •• Set your temperature settings for each of the lifestyle modes (settings > temperatures). Select the mode and rotate the dial to the right temperature. On iOS devices you need to tap the dial first ...

Geo Cosy The switch is a mains powered thermostat switch. It works in addition to your existing thermostat - which can stay where it is - so no redecorating required! The switch can control the heating for up to 2 zones, however you will need to purchase an additional Cosy Display for each additional zone. The switch requires a compete ...

Geo Cosy router and connect it up •• Assemble the power adapter, plug it in and connect it to the hub •• Connect the hub to your broadband router using the Ethernet cable supplied •• The LED light by the cloud on the right of the hub will turn green, the one on the left will turn amber 2. The system will ...

Geo Cosy •• Setting up: powering up and getting to know Cosy •• Installing the switch or switches: this will be completed by the installer or, if you have bought Cosy without installation being included, you will need to arrange for an electrician to install the switch/es. Check contents of the box Setting up (set-up gui ...

Geo Cosy j j The following safety regulations must be observed at all times. Failure to observe precautions could result in severe injury or death. This product must only be installed by a competent person. h It is important to observe some simple safety precautions when installing and using this product. Read this important information b ...

Geo Cosy or call the support team on 0845 094 1508. Office hours are 9-5.30 Monday-Friday. Cosy COSY-Z-USG-105_3 ...