Trigger 3001 Manual 

the control module as required. This is accomplished by re-setting the pass code on the two components. Use this function if there is any interference when using the system or to add more than one system to the same vehicle. Control Module: 1) On the Control module, press button 1 and 4 at ...

Trigger 3001 IMPORTANT NOTE ON WIRING: Do not wire your accessories using a chassis ground instead of the ground wire provided in the Trigger harness. THE ACCESSORY WILL NOT TURN OFF IF WIRED THIS WAY. The Trigger should be a closed circuit to protect the circuitry and so it will not introduce noise into the rest of the electrical system on the ve ...