Lightware MX32x32DVI-Pro Operation & User’s Manual

7.4 EDID Router operation Select View->EDID router window Info After a successful connection all identifying information is shown under the Help menu. The EDID ROUTER window appears and the software starts to synchronize EDID list with the Matrix switcher. After synchronization process the current status of the MAT ...

Lightware MX32x32DVI-Pro 10 Warranty Lightware Visual Engineering warrants this product against defects in materials and workmanship for a period of three years from the date of purchase. The customer shall pay shipping charges when unit is returned for repair. Lightware will cover shipping charges for return shipments to customers. In case of defect please call your lo ...

Status window Installed cards firmware, hardware revisions and the router’s health is displayed in this window. 5.3.3 Comm Port menu Comm Port menu contains 2 sections: Serial ports available on the current PC IP addresses found on the network The IP addresses displayed in this window are those Lightware products, that are connected to the net ...

Lightware MX32x32DVI-Pro Preliminary: Naming conventions for future cards: MX-RJ45-DVI-IB SCH_1.0 PCB_1.0 Single link DVI-D input card with RJ-45 connector MX-RJ45-DVI-OB SCH_1.0 PCB_1.0 Single link DVI-D input card with RJ-45 connector MX-OPT-DVI-IB-NT SCH_1.0 PCB_1.0 Single link DVI-D input card with optical connector MX-OPT-DVI-OB-NT S ...

Lightware MX32x32DVI-Pro 3.3.8 Download EDID content to the router Description: EDID hex bytes can be written directly to the user programmable memory locations (locations #51...#100). Sequence:  Prepares the router to accept EDID bytes to the specified location LLL {WL#LLL}  Router responds that it is ready to accept EDID bytes (E_L ...

Lightware MX32x32DVI-Pro 1.5 Electrical connections 1.5.1 DVI inputs MX32x32DVI-Pro provides 24 pole „digital only” DVI-D connectors for input connections. Always use high quality DVI cable for connecting sources and displays. Each input has a built in signal detection circuit with an LED located next to the input connector. The LED li ...

Lightware MX32x32DVI-Pro 9.1 Mechanical Drawings 9.1.1 Mechanical Drawings – Front View 482 mm Front view MX16x16DVI-Pro 482 mm Front view MX32x32DVI-Pro ...

Lightware MX32x32DVI-Pro 5.6 ERROR Messages During remote operation there may happen some trouble with the communication. This case the Matrix Controller software displays error messages on the screen. Error messages are listed below: Unable to open Socket to the Server!!! Trigger: More than one user tries to access the router via LAN. Exp ...

3.5 Commands – Quick summary DVI signal control commands Command description See in chapter Command DVI /Switch one input to one output 3.1.1 {ii@oo} DVI / Switch one input to all outputsSwitch one input to all outputs 3.1.2 {ii@O} DVI / View connection on the specified output 3.1.3 {?oo} DVI / View connection on all outputs 3.1.4 {vc} DVI ...

Lightware MX32x32DVI-Pro 1.6 Advanced EDID Management MX32x32DVI-Pro provides an EDID Management feature with advanced functions that helps system integration. The built in EDID Router stores and emulates 100 EDID data plus all monitor's EDID that are connected to the output connectors. First 50 EDID are factory presets, while memories 50 to 100 are user programmable. T ...