RFXCOM RFXtrx Series Operation & User’s Manual

RFXtrx Version 5.68 page 54 / 70 17.1. DIY P1 connection for RFXtrx433XL batch 3618 and 4018 1. Open the enclosure by removing the 4 screws. 2. Connect a 4k7 resistor between 3V3 and RxD. 3. Connect the RJ11 cable to the RFXtrx433XL PCB RFXtrx V5.0: RJ11-2 to RTS RJ11-3 to GND RJ11-4 not used RJ11-5 to RxD 4. Cut a few plastics fr ...

RFXCOM RFXtrx Series RFXtrx Version 5.68 page 62 / 70 22. EC Declaration of Conformity EC Declaration of Conformity RFXCOM declares that the product: RFXtrx Brand: RFXCOM Type: RFXtrx433, RFXtrx433E, RFXtrx433XL conforms with the essential requirements and other relevant provisions of the following directives and complies with the following standards ...

RFXtrx Version 5.68 page 31 / 70 7.1.3. ATI Remote Wonder Plus Dec Hex Button 0 00 A 1 01 B 2 02 power 3 03 TV 4 04 DVD 5 05 ? 6 06 Guide 7 07 Drag 8 08 VOL+ 9 09 VOL- 10 0A MUTE 11 0B CHAN+ 12 0C CHAN- 13 0D 1 14 0E 2 15 0F 3 16 10 4 17 11 5 18 12 6 19 13 7 20 14 8 21 15 9 22 16 txt 23 17 0 24 18 Open Setup Menu 25 19 C 26 1A ^ 2 ...

RFXCOM RFXtrx Series RFXtrx Version 5.68 page 41 / 70 7.15. How to find the Screenline ID You can assign a random ID to the Screenline. If you want to use the same ID as the remote you can find the ID of the remote using RFXmngr. Start RFXmngr and enable only the Lighting4 protocol and undec on. Press a button on the remote and you will receive a mess ...

RFXCOM RFXtrx Series RFXtrx Version 5.68 page 69 / 70 Version 5.36– April 25, 2017 Quigg added OTIO EHS5050 added Blyss temperature/humidity sensor 630467 added Outlook Motion Blinds added Version 5.37– May 5, 2017 Cartelectronic TIC in Type2 and Ext2 Version 5.38– May 22, 2017 BBSB not in Ext2 Profile Qnect added Version 5.39– July 28, 2017 B ...

RFXtrx Version 5.68 page 27 / 70 6.2. Update firmware in the RFXtrx step by step • Click the Connect to Device button. The RFXtrx will automatically switch from normal mode to the bootloader now. • Click the Open HEX file button and load the RFXtrxyyy??_zz.hex file Be sure to load the latest firmware file for the RFXtrx. yyy i ...

RFXCOM RFXtrx Series RFXtrx Version 5.68 page 10 / 70 Power, gas water metering Cartelectronic TIC, Encoder, Linky - https://www.cartelectronic.fr/index.php?id_product=124&controller=product cent-a-meter Electrisave OTIO EHS5050 OWL CM113, CM180, CM119, CM160, CM180, CM180i - http://www.theowl.com/ Revolt NC5461 - http://www.pearl.de/a-NC5462-5452 ...

RFXCOM RFXtrx Series RFXtrx Version 5.68 page 24 / 70 5.1. Receiver The RF protocols to be received can be configured on the Main tab at Set Mode. Click Save Settings to save the selected protocols in non-volatile memory of the RFXtrx. This configuration is now restored every time after a power up. Note that these settings are lost after a firmware up ...

RFXCOM RFXtrx Series RFXtrx Version 5.68 page 39 / 70 7.8. MDREMOTE V106, V107 This MDREMOTE has been tested. http://www.ultraleds.co.uk/mini-dimmer-with-rf-remote-control-12-or-24v-dc-12a-maximum.html The RFXtrx433 can only transmit MDREMOTE commands. Procedure to find the ID of the MDREMOTE: In RFXmngr enable the X10 protocol and enable “Undec on� ...

RFXCOM RFXtrx Series RFXtrx Version 5.68 page 33 / 70 7.2. Harrison address conversion to switch settings The address used is converted to the address selected in the Harrison curtain motor using the table below. switch 1 2 3 4 5 6 7 8 H H H H X X X X A 0 1 1 0 1 0 0 0 0 B 0 1 1 1 2 0 0 0 1 C 0 1 0 0 ...