J-Tech Digital JTECH-HDBT73 Operating Instructions Manual

Email: [email protected] USER MANUAL J-Tech Digital® HDBaseT Extender 4K@60HZ 4:2:0 Model: JTECH-HDBT73 JTD-ID: 73 ...

J-Tech Digital JTECH-HDBT73 receiver (RX). It distributes HDMI signal via CAT5e/CAT6a cable at 70m/PoC, and enables IR and RS232 pass-through to control local source device from remote or far-end display.  1x Transmitter (TX)  1x Receiver (RX)  2x TX Mounting Ears with 2 Screws  2x RX Mounting Ears ...

IR IN, IR OUT, RS232 General Maximum Video Resolution 4K×2K@60Hz 4:2:0, including 1080p@60Hz Transmission Mode HDBaseT Transmission Distance 1080p signal to 70m, 4K signal to 40m Bandwidth 10.2Gbps Video Standard HDMI 1.4 with HDCP 2.2 Power ...

J-Tech Digital JTECH-HDBT73 PACKAGE LIST ......................................................................................................... 1 FEATURES................................................................................................................ ...

J-Tech Digital JTECH-HDBT73 conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the JTECH-HDBT73 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk ...

J-Tech Digital JTECH-HDBT73  Ensure that the display device has been set to the correct input.  Ensure that the HDMI cables used for both the source/transmitter and the receiver/display are properly connected and are working. Test the HDMI cables directly from a source to display and ensure their operation.  Ensure that the CAT5e/CAT6a cable has not be ...

J-Tech Digital JTECH-HDBT73  Specifications, pictures & software described herein are subject to change without prior notification.  Only use the provided power supply when operating this unit. J-Tech Digital® is not responsible for any damage due to customer neglect.  All trademarks are the sole property of their respective compan ...

J-Tech Digital JTECH-HDBT73 ② RS232 Euroblock/Phoenix connector for connecting an RS232 data device. ③ HDMI IN (TX) HDMI port for connecting the video source device (e.g. Blu-ray DVD) HDMI OUT (RX) HDMI port for connecting the video display. ④ CTRL/UPDATE Switch for determining the behavior of the RS232 con ...

 System should be installed in a clean environment with proper temperature and humidity.  All of the power switches, plugs, sockets, and power cords should be insulated and safe.  All devices should be connected before power on. SYSTEM CONNECTION 3 ...