CALEFFI SATK Series Instruction Manual

compensation It is the value (-5.0°C ÷ +5.0°C) to be added to/detracted from the dis- played room temperature in order to compensate any possible error. • P02 - Room anti-frost start temperature It defines the start temperature for the room anti frost function (0.1°C ÷ 10°C). N.B.: 0.0 = value 0.0 disa ...

CALEFFI SATK Series ture (if thermostat is enabled) This is the temperature set for the activated temperature level (DAY - NIGHT - MANUAL). 12.2 - Display temperature from domestic hot water probe This is the temperature read by the domestic hot water probe fitted in the heat interface unit ...

to dispose this product as domestic waste. The correct disposal of this product helps to prevent potential negative consequences for the environment and human health. 1 - How to use this instruction booklet This booklet is divided into two sections, each of which having its own addressee: • Installer section ...

CALEFFI SATK Series 2 - General instructions ...............................................................................................2 3 - Main features ......................................................................................................... ...

CALEFFI SATK Series 1. Press key . Icons and 1 will appear on the display and show the first day of the week. 2. Press key . Icon will light upon the display and show the pre-heating program. Icon (pre-heating enabled) or (pre-heating tank disabled) and the jumper are ON or OFF matching the level of the displayed time. 3. Turn bu ...

CALEFFI SATK Series In case the antilegionella function is enabled, from 3:00 a.m. to 3:30 a.m. the domestic hot water temperature set point is increased to provide thermal disinfection of the heat exchanger. During this cycle icon blinks. ...

CALEFFI SATK Series mode enabled is space heating. No matter which function has been selected, the room anti-freze function is always operative (cfr. respective section). ...

1. Press key . Icons and 1 will appear on the display and show the first day of the week. Icons / and the jumper are ON or OFF matching the DAY / NIGHT level of the displayed time. 2. Turn button in order to scroll the times of the day and to move from one day to another. ...

CALEFFI SATK Series If necessary the original values of the remote control device as set by the manufacturer can be restored. Weekly heating program Days Monday - Friday Saturday - Sunday The restored values are as follows: • Temperature DAY: 20°C • Temperature NIGHT: 16°C • Temperature MANUAL: 20°C NIGHT 00.00 ÷ 06.00 08.00 ÷ 16.3 ...

CALEFFI SATK Series Set time and temperature Weekly program Change displayed value (turn). Select automatic / manual (press). Confirm (press). Alarm reset Select temperature level (day/night) ...

CALEFFI SATK Series 1. The SATK’S remote control device must be installed only by expert personnel. To correctly install the device and in compliance with the regulations in force about electrical appliances, use a dedicated cable raceway to connect it. In case this is impossible, any interference due to electric wires may cause poor working of t ...

CALEFFI SATK Series 1. Press key until icon starts blinking. 2. Turn button to set the temperature you want. ...