E.L.B. FT-30 Technical Documentation Manual

Rev. 1.9 Page 11 CyberJump for the Internet’ under Windows 95, Windows 98, and Windows NT 4.0 Designed for Netscape 3.x/4.0, Microsoft Internet Explorer 3.x. Menu Activates the HyperMenu. Go to Bookmark Displays bookmark window. Add Bookmark Adds current page to bookmark window. Vertical Scroll Jumps to the ve ...

E.L.B. FT-30 Rev. 1.9 Page 3 1 Commissioning Please follow the steps listed before install the desktop in the Ex-area: • Equipment or machine has to be stress-free ! • Connect the interconnection cable between receiver and keyboard-, mouse port of the PC. • Check all function of the desktop. • Power the equipment. � ...

E.L.B. FT-30 Rev. 1.9 Page 13 3. If dirty, clean the roller(s) using a cotton swab moistened lightly with isopropyl (rubbing) alcohol. After cleaning, make sure the roller(s) are still centered in their channels. Make sure that fluff from the swab is not left on the roller(s). 4. Replace the ball and retainer ring. 8 Troub ...

E.L.B. FT-30 Rev. 1.9 Page 9 Scrolling and Zooming with the Mouse Task What is It? How to Do It? Wheel Scroll Use Wheel Scroll for precise up and down movement, To scroll up, move the wheel forward; to scroll down, move the wheel back. AutoScroll Use AutoScroll in Windows 95, Windows 98, Windows NT 4.0, and Microsoft’ Offi ...

Rev. 1.9 Page 6 4 Connecting the Receiver The Logitech Cordless Desktop uses digital radio technology. Communication between the Logitech Cordless Desktop – keyboard and mouse – and your computer is achieved with great reliability using radio waves. The Cordless Keyboard and Cordless Wheel Mouse do not have ...

E.L.B. FT-30 Rev. 1.9 Page 7 4. Connect the receiver’s orange keyboard cable to the computer’s keyboard port. Make sure to match up the keyboard icon on the cable end with the keyboard icon next to the keyboard port on your computer. (Some computers may not have this keyboard icon.) If you are installing the keyboard cab ...

E.L.B. FT-30 Rev. 1.9 Page 14 Mouse Not Detected When using the mouse, it may not be detected by the computer. To remedy this problem, try the following: z Make sure the mouse receiver cable (with the green end) is plugged into the right port – serial or mouse port. z Make sure your serial (or mouse) port has the proper co ...

E.L.B. FT-30 Rev. 1.9 Page 10 Making Button Assignments Assign special functions to mouse buttons, by using the Buttons tab. The Buttons tab is part of Mouse Properties. Click the down arrow to select a function for a button. Click the Options button to specify settings for AutoScroll, Universal Scroll, CyberJump’ and Hype ...

E.L.B. FT-30 Rev. 1.9 Page 16 11 Technical Data EEx-Keyboard Type FT-30 z Voltage: 3 VDC (2x AA primary cells á 1,5 VDC) z Current: 1 mA z Capacity of Batteries: 2850 mAh z Transmitting power: <25 mW z Transmitting frequency: 26.995 – 27.195 MHz z Ex-approval: II 2G EEx ia IIC T4 Tamb= -20...+40° C DMT 00 ATEX E 048 z ot ...

Rev. 1.9 Page 12 Cursor Enhancement under Windows 3.1x Use the Cursor Enhancement dialog box to customize the cursor. To display the dialog box, click the Cursor button in the MouseWare Control Center. Button Assignments under Windows 3.1x MouseWare allows you to assign functions to three mouse buttons only and ...

Rev. 1.9 Page 8 7. Follow the on-screen instructions. Note: If either the mouse or keyboard do not work properly after you have installed the Cordless Desktop, please refer to ”Troubleshooting” later in this manual. You will notice if the mouse or keyboard is malfunctioning because for the mouse the screen c ...