LaserLiner X2-Laser Operating Instructions Manual

Green cross-line laser with horizontal laser circle and two vertical lines – Exact horizontal and vertical alignment of objects – Time-saving automatic alignment – Easy alignment of slopes – Visual signals indicate when the device is outside its self-levelling range – Integrated hand-held receiver mode for outdoo ...

LaserLiner X2-Laser Position the device about 5 m from a wall and switch on the cross laser. Mark point B on the wall. Turn the laser cross approx. 2.5 m to the right and mark point C. Check whether the horizontal line from point C is level with point B to within ± 1 mm. Repeat the process by turning the laser to the left. B C 2,5 m < 1 mm = ...

LaserLiner X2-Laser S DE 02 EN 11 NL 20 DA 29 FR 38 ES 47 IT 56 PL FI PT SV NO TR RU UK CS ET RO BG EL Laser 515 nm ...

LaserLiner X2-Laser levelling. The laser lines flash when the device is outside the automatic levelling range of 3°. Position the device such that it is within the levelling range. ! Horizontal and vertical levelling Release the transport restraint, push the slide switch (2) to the left. The ho ...

LaserLiner X2-Laser – The measuring device complies with electromagnetic compatibility regulations and limits in accordance with the EMC Directive 2014/30/EU. – Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of people with pacemakers – may apply. El ...

LaserLiner X2-Laser This device complies with all necessary standards for the free movement of goods within the EU. This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment. Further safety and supplementary notices at: http://laserli ...

Groene kruislijnlaser met horizontale lasercirkel en twee verticale lijnen – Exact horizontaal en verticaal uitlijnen van objecten – Tijdbesparende automatische uitlijning – Eenvoudige uitlijning van hellingen – Optische signalen waarschuwen wanneer het apparaat zich buiten het nivelleerbereik bevindt – Geïntegreerde ...

LaserLiner X2-Laser Preparing the calibration check It is possible for you to check the calibration of the laser. To do this, position the device midway between 2 walls, which must be at least 5 metres apart. Switch the device on (Laser cross ON). The best calibration results are achieved if the device is moun ...

1H360° 2V 1P S Number and direction of the lasers H = horizontal laser V = vertical laser P = plumb laser S = slope function 6 8 1 2 3 4 5 6 7 8 9 Laser emitting window Slide switch a ON b OFF / Slope mode / Transport lock Rechargeable battery compartment (bottom) 1/4”/5/8“-tripod threads (bottom) LED hand receiv ...

LaserLiner X2-Laser – The power supply unit is to be used in enclosed spaces only; do not expose to moisture or rain as this may result in the risk of electric shock. – Charge the device‘s battery completely prior to use. – Connect the power supply unit to the mains and connecting socket on the battery pack. Only use th ...

LaserLiner X2-Laser line, the underlying technology may cause differences in brightness in different areas of the line. This may lead to different ranges in hand receiver mode. ! Observe the laser receiver‘s operating instructions for line lasers. ! Hand receiver mode Optional: Working with ...