Namron ZigBee Quick Start Manual

• 0x0003: Identify • 0x0004: Groups • 0x0005: Scenes • 0x0006: On/off • 0x0008: Level Control • 0x0300: Color Control • 0x0b05: Diagnostics Output Clusters • 0x0019: OTA 12. ZigBee Clusters the device supports are as follows: 13. OTA Wiring Diagram The device supports firmware updating through OTA, and will ac ...

Note: 1) If the device is already at factory default setting, there is no indication when factory reset again . 2) All configuration parameters will be reset after the device is reset or removed from the network. Step 1: Re-power on the device for 5 times continuously. 8. Find and Bind Mode Step 1: Re-power on the devic ...

Namron ZigBee 09.ZGDIYRGBW.04282 Function introduction Important: Read All Instructions Prior to Installation 12VDC Input Common Anode output (+) • DO NOT install with power applied to device. • DO NOT expose the device to moisture. Product Data Safety & Warnings Input Voltage Output Type Output Current 12/24VDC Constant voltage 7 ...