General ML-3DR Instruction Manual

A tripod can be purchased from your nearest measurement tool dealer. The below instructions are generic only and set-up methods may vary between models. Refer to the documentation from the tripod manufacturer for details. • Extend the tripod legs to the required height and ensure the legs are spread wide enough so that the t ...

General ML-3DR questions please contact customer support. 1300 658 338 Visit www.spoton.com.au for more information. Customer Support Specifications Product code GML3DRSTDKT Warranty 7 Years (with online registration) Accuracy ±1.5mm at 10m Operating range 60m (with optional detector) Levelling range ±4° Laser class 2 Red B ...

General ML-3DR li-ion battery packs as its power source. Charging the li-ion battery pack • Insert the charger into the charging adaptor. Connect the li-ion battery onto the charging adaptor. Plug the charger into a power source. (Fig.1) • Progress will be shown by the power indicator display on ...

battery as its standard power source. Removing & inserting the alkaline battery • Insert the alkaline batteries into the battery tray according to polarity. • Open the battery cover door and insert the battery tray. • Close the battery door. SET UP Mounting the staff ...

General ML-3DR ML-3DR M U L T I - L I N E L A S E R L E V E L Product Code: GML3DRSTDKT ...

General ML-3DR site. Ensure the location is clear of traffic. • Place the laser on a level surface such as a bench or mount. OPERATION Powering on (self-levelling) • To turn the instrument on, slide the power / locking switch to the “unlocked” position (Fig.3). Self levelling will commence and the horizo ...

General ML-3DR If anything is missing please contact your retailer. Item Checklist General ML-3DR Laser glasses (red) Laser target (red) Lithium-ion battery pack Hard carry case Indoor charger & charging adaptor plate INCHES CM 1 1 2 3 4 5 6 7 2 3 Multi-purpose magnetic mount ...

General ML-3DR • Attach the two mount pieces together via the magnetic backing (Fig.9). • Attach the instrument to the mount using the thumb screw. • Use the clamp to mount to a suspended ceiling track, ensuring that the mount has a strong hold before releasing your hands. • To adjust the height of the instrument, unlock the height adjust ...

General ML-3DR Spot-on Laser & Tool Company reserves the right to make changes to specifications and product descriptions at any time. © Spot-on Laser & Tool Company. 2020. Printed in China. ...

General ML-3DR • Attach the instrument to the mount using the thumb screw. • Attach the mount to a metal surface, ensuring that the mount has a strong hold before releasing your hands (Fig.8). • To adjust the height of the instrument, unlock the height adjustment knob. Rotate the height adjustment knob to raise or lower the instrum ...

LINE 4 Using the Laser Laser port Unlocked position (power on / self levelling) Locked position (power off) / Tilt lock function (manual levelling) Laser port Bubble vial Power / locking switch Battery cover door 5/8” x 11 tripod thread Control panel 1/4” tripod thread ...

specifically designated batteries. • Store the tool out of reach of children and other untrained persons. Laser tools are dangerous in the hands of untrained users. • Use only accessories that are recommended for your model. • Tool service must be performed only by qualified repair personnel. Repairs, s ...