Nextech DC1102 Operation & User’s Manual

 Channel  2  476.4500  Duplex - Repeater Output  Channel  3  476.4750  Duplex - Repeater Output  Channel  4  476.5000  Duplex - Repeater Output  Channel  5  476.5250  Duplex - Repeater Output     (Emergency use only)  Channel  6  476.5500  Duplex - Repeater ...

Nextech DC1102 When the device has not been used for 6 seconds, economy mode is automatically activated. This does not affect the reception or transmission of the radio. Standby mode is automatically re-activated as soon as a signal is detected. 16. Built-in Flash Light Your device has a built-in flash light that can be used for sending light si ...

Radio Communications (Citizen Band Radio Stations) Class License and in New Zealand by MED General User Radio License for Citizens Band Radio. Operation is subject to conditions contained in those licenses. This lightweight hand-held transceiver is suitable for all manner of recreational ...

Nextech DC1102 in any way. • Do not use the device in a potentially explosive setting (e.g. Around pumps, on the lower deck of a boat or around a fuel-storage installation or chemical products) If traveling in a car or by bike, stop before using the device. • Swit ...

Nextech DC1102 Press the call button one time quickly, the call tone will be transmitted on the set channel. 12. Roger Beep On/Off: After the PTT button is released, the device will send out a roger beep to confirm that you have stopped talking. Press the MENU button 6 times, “RO” will be displayed. Press the UP▲/Down▼ button to set the rog ...

Nextech DC1102 Press the MENU button twice, the current CTCSS code will flash on the display. Press the up▲ /down▼ button to change the 38 available codes. Press the PTT button to confirm and return to stand-by mode. This license free radio operates on the 476MHZ frequency band; the device has 80 available radio channel ...

Nextech DC1102  Channel  36  477.3000  Repeater Input  Channel  37  477.3250  Repeater Input  Channel  38  477.3500  Repeater Input  Channel  39  477.3750  Simplex  Channel  40  477.4000  Simplex     Highway Channel  Channel  41  476.4375  Duplex - Repeater Output  Channel  42  47 ...

Nextech DC1102 6. Down Button 7. Call Button 8. Speaker 9. Up Button 10. Menu Button 11. Power ON/OFF Button 12. PTT (Push to Talk) Button 13. Belt Clip 14. Charger/Headset Jack 15. Receiving Icon 16. Transmitting 17. Volume Icon 18. Scan Icon 19. Lock Icon 20. Battery Level Indicator 21. Channel Number ...

Nextech DC1102 1. Turning the Device ON/OFF Switch on the Device: Press and hold the Power Button for 3 seconds then you will hear a beep sound. Switch off the device: press and hold the Power Button for 3 seconds then you will hear a beep sound. 2. Adjusting the Volume To increase the volume, press the ▲Up Button; press the ▼Down Button to decrease t ...

The device is in “Reception” mode when it is turned ON and not transmitting. When a signal is received on the current channel, the LCD will display receiving icon. When you press the PTT (push to talk) button, the device switches to “Transmission” mode. Hold the device in a vertical position with the Mic (mic ...