Aranet 4 HOME Operation & User’s Manual

temperature, relative humidity and atmospheric pressure. * The device is suitable for monitoring the CO² level at home, in school, office or any other indoor environment. Measurement data is displayed on a power-efficient e-ink screen allowing for long battery life. Additiona ...

Aranet 4 HOME pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in ...

Aranet 4 HOME alerts when CO² concentration is too high and unhealthy. The calibration progress. Do not remove batteries during firmware upgrade. The battery is exhausted. Replace the batteries. Frost can damage the sensor. The recommended operating temperature of the sensor is 0 °C to 50 °C (32 °F to 122 °F). Pin code representation, when pairin ...

Aranet 4 HOME Monitors air quality at your home, school, office or any other indoor private or public spaces. USER MANUAL Aranet4 HOME, Aranet4 PRO ...

base station The Aranet PRO base station serves as a device for collecting, storing and maintaining data from all types of Aranet sensors, including Aranet4 PRO. Up to 100 sensors can be connected to a single Aranet PRO base station which has a capacity to store the measurement history up to 10 years. To connect t ...

Green represents normal CO² level (below 1000 ppm) Yellow represents average CO² level (1000 to 1400 ppm) Red represents high CO² level (above 1400 ppm) CO² calibration mode indication. Symbol “A” is displayed when calibration is set to automatic. No letter is displayed when calibration is set to manual mode. ...

Aranet 4 HOME (access to device’s location should be allowed due to general requirement for Bluetooth apps to work correctly on Android OS) app to: How to pair Aranet4 to my smart device using the Aranet4 app Access real-time measurement data overview View up to seven day measurement h ...

Aranet 4 HOME disable (0) the Bluetooth connectivity. Enable/disable device connectivity to Aranet radio (available only for the PRO version of the product.). Refer to chapter Using Aranet4 device with the Aranet PRO base station. Temperature units – switch between either Celsius or Fahrenheit degrees. AUTO / MANUAL – switch the CO² calibr ...