Datalogic Controller SC6000 Quick Reference Manual

17 The SC6000 Controller will store the complete system configuration on the Compact Flash card. If a slave scanner has to be replaced, the corresponding configuration (node address, code configuration, PackTrack™ configuration, etc.) is automatically downloaded by the SC6000 into the new scanner at the next system startup. NOTE All repl ...

Datalogic Controller SC6000 14 KEYPAD AND DISPLAY The SC6000 display shows different messages according to the following operating modes. Use the SC6000 keypad to scroll through the windows or navigate in the menu. Standard Mode Upon startup, the diagnostic mask window is visualized by default. Using the UP and DOWN keys it is possible to scroll the other windows fol ...

19 COMPLIANCE See the SC6000 Reference Manual for the Declaration of Conformity. FCC Compliance Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules. Operation is subject to the following two condition ...

Datalogic Controller SC6000 6 ETHERNET CONNECTOR Pin Name Function 1 TX + Transmitted data (+) 2 TX - Transmitted data (-) 3 RX + Received data (+) 6 RX - Received data (-) 4, 5, 7, 8 N.C. Not connected 1 8 Harting RJ Industrial Female Connector NOTE For Ethernet connections, always use the Harting RJ Industrial® Push Pull Ethernet connector (included in the package ...