Advantech UNO-2050E Operation & User’s Manual

26 3.6 HDD Extension Flexibility Although UNO-2050E is an embedded platform, there is reserve flexibil- ity to install one 2.5” HDD. Some customers want to install a popular operating system, like Windows 2000/XP or need for larger data storage capability. UNO-2050E is also an ideal platform for applications with HDD demand. Please ...

Advantech UNO-2050E 16 Counter/Timer Control Register The Counter/Timer Control Register controls the function and status of each counter/timer signal source. Table 2-9 shows the bit map of the Counter/Timer Control Register. The register is readable/writable regis- ter. While being written, it is used as a control register; and while being read, it is us ...

Advantech UNO-2050E mation on the UNO-2050E, including an overview and specifications. Sections include: • Introduction • Hardware Specifications • Safety Precautions • UNO-2050E Series • Chassis Dimensions ...

Advantech UNO-2050E DI0 and DI1 can be used to generate hardware interrupts. A user can setup the configuration of interrupts by programming the interrupt control register. The channels are connected to the interrupt circuitry. Users can disable/ enable interrupt function, select trigger type or latch the port data by set- ting ...

38 A.9 Enhanced IDE Connector (CN2) Table A.11: IDE Hard Drive Connector Pin Signal Name Pin Signal Name 1 IDE RESET 2 GND 3 DATA 7 (*2) 4 DATA 8 (*2) 5 DATA 6 (*2) 6 DATA 9 (*2) 7 DATA 5 (*2) 8 DATA 10 (*2) 9 DATA 4 (*2) 10 DATA 11 (*2) 11 DATA 3 (*2) 12 DATA 12 (*2) 13 DATA 2 (*2) 14 DATA 13 (*2) 15 DATA 1 (*2) 16 DATA 14 (*2) 17 DA ...

Advantech UNO-2050E 34 RS-485 Signal Wiring The RS-485 standard supports half-duplex communication. This means that just two wires are needed to both transmit and receive data. Hand- shaking signals (such as RTS, Request To Send) in RS-232 are normally used to control the direction of the data flow and to switch the transmis- sion accordingly. In RS-485 m ...

Advantech UNO-2050E UNO-2050E’s hardware functions, including connecting peripherals, switches and indicators. Sections include: • UNO-2050E Peripherals • COM1 & 2: RS-232 Interfaces • COM3 & 4: Isolated 5-wire RS-232/ 422/485 • Onboard Isolated Digital Input • Onboard Isolated Digital Out ...

Advantech UNO-2050E 36 A.7 VGA Display Connector (VGA1) VGA Connector Pin Assignments Chipset The UNO-2050E uses a AMD CS5535 chipset for its SVGA controller. It supports interlaced and non-interlaced analog monitors (color and mono- chrome VGA) in high-resolution modes while maintaining complete IBM VGA compatibility. Digital monitors (i.e. MDA, CGA and ...

Advantech UNO-2050E Table A.12: UNO-2050E Control Register Base Address 7 6 5 4 3 2 1 0 Base+00H R Isolated Digital Input Status Register DI7 DI6 DI5 DI4 DI3 DI2 DI1 DI0 Base+01H R/W Isolated Digital Output Control/Status Register DO7 DO6 DO5 DO4 DO3 DO2 DO1 DO0 Base+02H R/W Interrupt Enable Control/Status Register DI1EN DI0EN Base ...

Advantech UNO-2050E Phoenix Power Connector Pin Assignments A.6 PS/2 Keyboard & Mouse Connector PS/2 KB/MS Connector Pin Assignments Table A.8: Phoenix Power Connector Pin Assigns Pin Signal Name 1 +9~30 VDC 2 GND Table A.9: Keyboard & Mouse Connector Pin Assigns Pin Signal Name 1 KB DATA 2 MS DATA 3 GND 4 VCC 5 KB CLOCK 6 MS CL ...

Advantech UNO-2050E 8 2.1 UNO-2050E Peripherals The following two figures show the connectors on UNO-2050E. The fol- lowing sections give you detail information about function of each peripheral. Figure 2.1: UNO-2050E Front Panel Figure 2.2: UNO-2050E Rear Panel 2.2 COM1 & 2: RS-232 Interfaces The UNO-2050E offers two standard RS-232 serial communicatio ...

Advantech UNO-2050E 32 Jumper Setting for RS-422/485 Interface: (Default Setting) Jumper Setting for RS-232 Interface: RS-485 Auto Flow Control & RS-422 Master/Slave Mode Selection You set the “Auto Flow Control” mode of RS-485 or “Master/Slave” mode of RS-422 by using SW1 DIP switches for each RS-422/485 port. In RS-485, if the switche is set to ...