Tinycontrol GSMKON-030 Manual 

www.tinycontrol.eu INPUT/OUTPUT: •�1 TRANSISTOR OUTPUT: to power other devices, it gets voltage from the power supply, max 28V - 1A •� 4 OUTPUT open collector type (transistor BC847B): for switching relays, PoE ports, or other devices; •�4 LOGICAL INPUTS: to monitor other devices, such as power supply units, the reed switches. Cooperation with the outputs of OC, NO, NC •�4 ANALOG INPUTS, 12-bit converter INP1A: voltage measurement to 35V INP2: voltage measurement to 3.3V INP3: voltage measurement to 3.3V •�PT1000: for connecting ...

www.tinycontrol.eu IDC10 and RJ11 (bus 1-Wire): DESCRIPTION OF COMMANDS: Commands can be issued by SMS or via a dedicated application or any terminal (eg Hyper- terminal in Windows) that supports COM serial ports. The command issued by the SMS is: authorization code: command = parameters for example: 1234:reboot=1,2,t3 – activates output 1 and 2 for 3 seconds. Commands issued by the terminal are not preceded by an authorization code, authoriza- tion code we give only the first time you log in after turning on the device. The command help (availabl ...

www.tinycontrol.eu GSM Controller GSM v3 controller allow monitor by gsm network different phisical parameters and con- trol remotely on/off 5 outputs. Control is done through SMS messages and monitoring can be run by SMS or gprs data transmission to internet server. Http datas can be sent for example to www.thingspeak.com server, where are not only collected but can be read as dynamically presented graphs. Further GSM controller functionality is action automating. After simple set up when some input parameters reach the set size, outputs actions ...

www.tinycontrol.eu INPUT/OUTPUT: •�1 TRANSISTOR OUTPUT: to power other devices, it gets voltage from the power supply, max 28V - 1A •� 4 OUTPUT open collector type (transistor BC847B): for switching relays, PoE ports, or other devices; •�4 LOGICAL INPUTS: to monitor other devices, such as power supply units, the reed switches. Cooperation with the outputs of OC, NO, NC •�4 ANALOG INPUTS, 12-bit converter INP1A: voltage measurement to 35V INP2: voltage measurement to 3.3V INP3: voltage measurement to 3.3V •�PT1000: for connecting ...

www.tinycontrol.eu IDC10 and RJ11 (bus 1-Wire): DESCRIPTION OF COMMANDS: Commands can be issued by SMS or via a dedicated application or any terminal (eg Hyper- terminal in Windows) that supports COM serial ports. The command issued by the SMS is: authorization code: command = parameters for example: 1234:reboot=1,2,t3 – activates output 1 and 2 for 3 seconds. Commands issued by the terminal are not preceded by an authorization code, authoriza- tion code we give only the first time you log in after turning on the device. The command help (availabl ...

www.tinycontrol.eu Software upgrade Contents of the instructions is regularly checked and if necessary corrected. If the observations errors or inaccuracies, please contact us. It can not be ruled out that, despite best efforts, however, some discrepancies arose. To get the latest version, please contact us or distributors. © Konsorcjum ATS Sp.J. Copying, duplication, reproduction whole or in part without the consent of the owner is prohibited. Konsorcjum ATS Sp.J. ul. Żeromskiego 75, 26–600 Radom, POLAND tel./fax: +48 48 383 00 30, e-mail: ...

www.tinycontrol.eu Software upgrade Contents of the instructions is regularly checked and if necessary corrected. If the observations errors or inaccuracies, please contact us. It can not be ruled out that, despite best efforts, however, some discrepancies arose. To get the latest version, please contact us or distributors. © Konsorcjum ATS Sp.J. Copying, duplication, reproduction whole or in part without the consent of the owner is prohibited. Konsorcjum ATS Sp.J. ul. Żeromskiego 75, 26–600 Radom, POLAND tel./fax: +48 48 383 00 30, e-mail: ...