Oracle MICROS Workstation 6 Series Setup Manual

Securing the Adjustable Stand to a Counter The Adjustable Stand is a mounting option for each configuration of the Workstation 6 Series. When using this option, ensure that the adjustable stand is properly secured to a counter. 1. Place the Adjustable Stand flat on the counter surf ...

Oracle MICROS Workstation 6 Series 1. Disconnect all cables from the I/O ports. 2. Tilt back the workstation, and then 3. Squeeze the tabs on each side of the DC power cable, and then pull the connector out of the workstation power port. 4. If you secured the workstation to the Adjustable Stand using a security screw, remove the security scre ...

Oracle MICROS Workstation 6 Series Disassembling the Workstation Caution: The workstation’s Power Supply Unit (PSU) contains a permanently- connected fuse in the neutral line. After a fuse operation, parts of the PSU remain energized and present a shock hazard as long as the AC power cord is connected. Always disconnect th ...

Oracle MICROS Workstation 6 Series d. Attach the 10-Inch Customer Display with Pole Mount to the cash drawer or other surface using the four #8-32 base plate screws. 2. To attach the 10-Inch Customer Display with Pole Mount to surfaces with a cable routing hole: a. Tighten the pole base plate captive screws, if required. b. Guide ...

Oracle MICROS Workstation 6 Series configurations. Depending on the model, your workstation may not include some of the features described in this document. Figure 2-1 Oracle MICROS Workstation 625/655 Basic Features Table 2-1 Oracle MICROS Workstation 625/655 Basic Features Feature 1. Magnetic Stripe Reader 2. Powe ...

Oracle MICROS Workstation 6 Series 7. Make sure the quick release pin is depressed. If it is not depressed, you must pull the workstation toward you until it clicks in place. 8. If you want to secure the workstation to the Adjustable Stand, install the security hex bolt. 9. Connect the DC power cable to the wor ...

Oracle MICROS Workstation 6 Series hex bolts to anchor the cover to the workstation. 13. Turn on the workstation by pressing the power button. Chapter 3 Mounting the Workstation on an Oracle MICROS Stand 3-5 ...

Oracle MICROS Workstation 6 Series and the magnetic stripe reader. 5. Remove the screw in the magnetic stripe reader compartment, and then remove the screw in the expansion slot. 6. Carefully lift the rear housing away from the body of the workstation to avoid damaging the RFID tag cable. 7. Disconnect the ...

Oracle MICROS Workstation 6 Series 6. Connect the C13 power cord to the power supply. Chapter 4 Attaching the Epson PS-180 Power Supply to the Adjustable Stand 4-9 ...

plug the Power Adapter into an outlet to charge the battery. Securing the Workstation 625/655 to the Wall Mount The Workstation 625/655 can be mounted on a wall using an optional wall mount bracket.** 1. Install the wall mount: a. Ensure that the metal bracket is levelled with the ...

Oracle MICROS Workstation 6 Series Port or Connector Available Power Capability Mini-USB +5V @ 0.5A (2.5W) Chapter 5 Power Considerations for Peripheral Devices 5-3 ...