Euphonix MixView CS3000 Software Manual

Euphonix MixView CS3000 Euphonix CS3000/2000 MixView 3.2 Software Supplement 1 - 17 Build mode allows you to assemble automation from beginning to end as you go, a popular automated mixdown style. As with Loop mode, Build mode is set via the AutoPunch menu. To enter Build mode, be sure you have a title loaded and the DSC [Mix On] key is lit. From ...

1 - 4 Euphonix CS3000/2000 MixView 3.2 Software Supplement Fader dB Level Displays Fader Swap F1 F2 F3 Fader Name Menu F1 F2 F3 F4 F1 F2 F3 F4 F1 F2 F3 F4 dB Display Delay : 2.0 s Fdr Attn DSC Delay Clear Renum SS : Off Fader Names Prefs Menu 3.1 3.1 The display of fader dB levels has been enhanced. Previously, fader levels we ...

Euphonix MixView CS3000 Euphonix CS3000/2000 MixView 3.2 Software Supplement 1 - 13 Automating linked EQs I/O and DSC Status Lock Fader ON keys are only inhibited from manual toggling. SnapShot, Fader Linking and MIDI In controls may still be used to toggle ON/Mute status while Status lock is ON. SIDE NOTE: ComMic Talk LOCK Key toggles Lock On/Off When au ...

Euphonix MixView CS3000 CS3000/2000 MixView Software Supplement Version 3.2 Revision 3 Corporate HQ, Euphonix Inc. 220 Portage Ave, Palo Alto, CA 94306-2242 Voice: (650) 855-0400 / Fax: (650) 855-0410 / Web Page: www.euphonix.com Publish Date: July 1998 Operation Manual Part Number: 840-06048-01 In the interest of continued p ...

Euphonix MixView CS3000 1 - 8 Euphonix CS3000/2000 MixView 3.2 Software Supplement Monitor Level Linking 3.2 F1 F2 F3 F4 F1 F2 F3 F4 F1 F2 F3 F4 mA -> L e v e l f o l l o w: B mA DIM SRC LVL mA -> AA -> I/C CUT Linking Monitor levels does not allow for a dB level tracking offset between linked Monitors. All linked Monitors track at identic ...

Euphonix MixView CS3000 1 - 14 Euphonix CS3000/2000 MixView 3.2 Software Supplement The LIST Key 3.2 A dedicated key has been activated for the purpose of allowing instant access to the Cue List. The functionality of the Locate Menus has not changed, the LIST key simply serves as a shortcut to the Cue List Menu. Cues may be added to the list either by d ...

Euphonix MixView CS3000 Euphonix CS3000/2000 MixView 3.2 Software Supplement 1 - 21 For a two-per-channel CUBE, the same rules apply but editing also affects both console Upper and Lower Fader Blocks simultaneously. This is an impor- tant distinction. The following figure shows a two-per-channel CUBE setup: Cutting Automation Moves To begin editin ...

Euphonix MixView CS3000 Euphonix CS3000/2000 MixView 3.2 Software Supplement 1 - 5 Mix On Pass Rec Pass Ctrl Grps Mtrs Input M1 M2 L1 L2 L3 L4 PAN BAL SOURCE REV M1 M2 L1 L2 L3 L4 BAL PAN CS3000 CS2000 SIDE NOTE: Fader Swap may be initiated at any time. If a fader/pan/mute is “swapped-out” while it is currently punched in, the automa- tion mode ...

1 - 10 Euphonix CS3000/2000 MixView 3.2 Software Supplement Merging Snapshot Lists This feature requires a general understanding of how the current Title load system operates. Typically, a Title load request first clears all 50 Snapshot registers in the Mix Controller and then loads Snapshots from the incoming Title into cor ...

Euphonix MixView CS3000 Euphonix CS3000/2000 MixView 3.2 Software Supplement 1 - 19 MixView allows dynamic automation of the first eight (8) Panners provided by the Audio CUBE. The following list and graphic details which panner param- eters can be automated: • Front Pan • Front Focus • Front Div • Surround • Rear Pan • Panner Level � ...