Euphonix MixView CS3000 Software Manual

2 - 4 Euphonix CS3000/2000 MixView 3.0 Software Supplement OVR (OVERWRITE): This operation accompanies a Copy operation. Existing data is overwritten (no time is inserted) by the contents of the copy buffer beginning at the Start point. During an Overwrite operation, the End point is ignored and the Length of the Overwrite is eq ...

Euphonix MixView CS3000 Euphonix CS3000/2000 MixView 3.0 Software Supplement 11 - 75 From the Cue List menu, press [F4] (Edit) to display the Cue List Edit menu: F3 F1 F2 F4 There are four ways to trim a locate cue point: 1. Use the SpinKnob to increment or decrement the entire timecode ad- dress. 2. Directly enter the entire timecode address using the DSC ...

Euphonix MixView CS3000 8 - 60 Euphonix CS3000/2000 MixView 3.0 Software Supplement F3 F1 F2 F4 Notice that the SmartDisplay menu also changes to reflect the MIDI channel and program change parameters now being addressed just as if [F3] had been pressed. The double-ended arrow in the MIDI presets menu, designates which param- eter is currently adjusta ...

Euphonix MixView CS3000 I - 79 INSERT 2 - 3 INS 2 - 3 OVERWRITE 2 - 4 OVR 2 - 4 Overwrite 2 - 3 REPEAT 2 - 4 REP 2 - 4 Off-line Trim 3 - 13 On/C 1 - 1 Out3/MT routing 7 - 57 P Pan Assign 5 - 31 Pan menu 4 - 18 Pan mode 5 - 36, 5 - 37 Pan/B 1 - 1 panner screen 5 - 33, 5 - 34 Panners 5 - 31, 5 - 33, 5 - 34, 5 - 35, 5 - 36 Ass ...

Euphonix MixView CS3000 Euphonix CS3000/2000 MixView 3.0 Software Supplement 9 - 67 SECTION 9 : FADER LINKS™ F ader Linking allows any Group Master Fader or mute to internally control any automatable parameter within the console. Controllable objects include everything on the MIDI Remote Control, “able to receive control data” list. This feature prov ...

Euphonix MixView CS3000 Euphonix CS3000/2000 MixView 3.0 Software Supplement 6 - 45 Auto Dynamic™. After an initial punch-in has written, automation data for a fader, all subsequent punch-ins on that fader are done by touch-punch unless the Touch preference is set OFF in the SmartDisplay menu. (See previous section of this supplement) It is also possible ...

Euphonix MixView CS3000 Euphonix CS3000/2000 MixView 3.0 Software Supplement 5 - 35 Front Focus - Focus control is unique to the Euphonix Hyper-Surround system. It is similar in function to divergence. The major differentiating factors are that the Focus control does not render the L-C-R pan control ineffective, and that it requires three or more buses in ...

Euphonix CS3000/2000 MixView 3.0 Software Supplement 4 - 27 For this exercise, we will start with unconfigured Cube Buses. If the Bus Configure page is not clear, press the DSC [Clr] key and then [F3] (Yes) to the “Remove All?” prompt. We will configure the system to have 6 Aux and 6 Pan type buses. While in the Bus Configuratio ...

Euphonix MixView CS3000 Euphonix CS3000/2000 MixView 3.0 Software Supplement 6 - 41 SECTION 6 : MOVING FADERS SmartDisplay Menus Moving Faders vs Standard Faders: Notice that the Macros menu has been replaced by the Moving Faders menu at position F4. The macros menu has been relocated to position F1 in the Console menu as shown here. SIDE NOTE: F3 F1 F2 F4 ...

Euphonix MixView CS3000 Euphonix CS3000/2000 MixView 3.0 Software Supplement 8 - 61 Descriptive names may be assigned to any MIDI channels by pressing [F1] on the QWERTY keyboard. The Assignable key display shows up to eight charac- ters while the SmartDisplay menu shows the name’s first three characters: Linking Presets to Console SnapShots Sending ...

Euphonix MixView CS3000 10 - 70 Euphonix CS3000/2000 MixView 3.0 Software Supplement Be aware that changing the init state, active state or pulse width timing of a relay or speaker mute always resets the relay/speaker mute parameters back to their initialized states. SIDE NOTE: To sum Ext 1 with all other Master Monitor settings, set the Mon A, B or C parameter to ...