Euphonix MixView 3.0 Overview

Euphonix Product Bulletin: 001 Worldwide Sales, Euphonix Inc. 11112 Ventura Blvd. #301, Studio City, CA 91604 Voice: (818) 766-1666 / Fax: (818) 766-3401 Corporate HQ, Euphonix Inc. 220 Portage Ave, Palo Alto, CA 94306-2242 Voice: (415) 855-0400 / Fax: (415) 855-0410 / Web Page: www. ...

EPB-001 / MixView 3.0 Overview 1 - 2 SECTION 1 : SYSTEM REQUIREMENTS M ixview version 3.0 is an extremely powerful software release offering features such as Automated EQ and Automation Editing. It’s common with computer based systems that adding power to an operating system or application requires added horsepower to run. ...

Euphonix MixView 3.0 EPB-001 / MixView 3.0 Overview 2 - 4 advance of writing additional moves. MBR mode can be applied to both moving and non-moving fader systems, and in absolute as well as trim modes. III. Hyper Surround: • The Hyper Surround interface can be viewed in two modes; traditional 4 stem mode or the new single stem mode. The four stem mo ...

Euphonix MixView 3.0 EPB-001 / MixView 3.0 Overview 2 - 7 • The [Pass Ctrl] button no longer toggles in/out of the Pass system. This is to allow returning to the top level Pass menu from one of the Pass sub- menus quickly. • Desk aux automation moves are now displayed in real time on the Pass Control screen. • A color legend has been added at the ...

Euphonix MixView 3.0 EPB-001 / MixView 3.0 Overview 2 - 8 • Fader Null window has been significantly narrowed. Un-nulled faders and pots are now reliably picked up no matter how quickly you pass over the null position. • The capture range of a fader or pot (within which it is considered aligned after a SnapShot recall) has also been significantly n ...

EPB-001 / MixView 3.0 Overview 2 - 5 IV. Channel Functionality Enhancements: • Desk aux sends: N The A, B, C, D pots now each have individual mute & pre/post. N The aux source of each pot can be set as a preference to track the UF or LF source. N With F Rev channel hardware, the A, B, C, D pots are now assignable to all 8 aux bus ...

Euphonix MixView 3.0 EPB-001 / MixView 3.0 Overview 2 - 6 VI. Fader Links™: • The ability for a Group Master Fader to control almost any parameter within the console. Controllable objects include everything on the MIDI Remote Control, “able to receive control data” list above. This feature provides a preliminary Cube automation solution. Full C ...

Euphonix MixView 3.0 EPB-001 / MixView 3.0 Overview 2 - 3 I. Automated EQ from DSC assignable rotary controls: • Punch in on individual EQ parameters from the DSC rotary controls or ALL parameters from the channel EQ/Dyn attention key. • EQ changes written in automation are seen in real time on the DSC’s EQ screen. The Pass Control screen can als ...