EverFocus EBC890 Operation & User’s Manual

1. One reader, basic access control The most basic configuration involves one card reader and an electric strike. In this configuration, a person presents a card to the reader, and is either granted or denied access. The electric strike unlocks if the system grants access. Another variation of this scenario involves ...

EverFocus EBC890 output relay and the 4 alarm inputs can be assigned to either one of the two alarm output relays. The connection to a general alarm input is shown below: Fig. 11. Connecting Alarm-sensor to Fingerprint Controller Connection to Alarm Output Two alarm ...

EverFocus EBC890 This sets the door unlock time when the card is swiped or open door button is pushed. The default time is 3 seconds. The maximal door unlock time supported by the controller is 999 minutes and 59 seconds. The door remains open as long as the open door button is pushed down. The door open time does not start to count until the bu ...

Connect the positive end to the terminal 47 and the GND to terminal 48 as shown in Fig. 24. Fig. 24. Connecting the Power Supply The power supply for fingerprint controller should range in DC 12V±15%. The minimum output of power supply should be no less than 1.5A. Important Tips: The voltage supply s ...