TI CBL 2 Supplementary Manual

DataMate and one of the DataMate subprograms has been deleted from the calculator memory. All of the subprograms must be present in order for DataMate to function properly. (All related programs begin with "DATxxxx.") Reset the RAM on the calculator, then transfer the DataMate program f ...

TI CBL 2 program using the TI-89/92/92 Plus after using the DataMate program. This is caused by a conflict in some information left over in List 5. The information in the list cannot be used properly, so the calculator gives a Dimension error. To correct this, go into the calculator’s memo ...

TI CBL 2 Screen Explanation This screen appears when too much time has passed on a screen without activity. This timeout feature takes advantage of the Automatic Power Down (APD) feature of the calculator and CBL 2 to conserve battery power. ♦ Press À YES to continue the program. ♦ Press Á NO to quit. This screen appears when CBL 2 i ...

TI CBL 2 calculator and used for a different task or when the CBL 2 loses power. When the CBL 2 and calculator are reconnected, the calculator may not recheck the sensor setup, and this error results. Press ‘ to reset, and then set up the channel again. These three screens usually appear ...