Qlogic SANbox-16HA Installer's/ Installer's/user's Manual

SANbox-16HA Fibre Channel Switch 1-14 General Description 59005-03 Rev. A Installer’s/User’s Manual • Configure Loop Devices including: - Place any NL_Port into Loop Bypass Mode - Place any or all NL_Ports back into normal Loop Mode - Reset the Loop - Re-initializing the Loop • Configure the translation ...

Qlogic SANbox-16HA Installer's/ SANbox-16HA Fibre Channel Switch 2-16 Installation 59005-03 Rev. A Installer’s/User’s Manual Private Translated Loop Connections Figure 2-7 is an example of Translated Loop ports (TL_Ports) used in conjunction with each other and with F and FL_Ports. Use Switch management to configure the appropriat ...

SANbox-16HA Fibre Channel Switch A-6 Reference Information 59005-03 Rev. A Installer’s/User’s Manual Non-Operating Altitude: ....................0 to 15240m (0 to 50,000 feet) Non Operating Vibration:...................(In any axis): 5-500 Hz, random, 2.09 G rms, 10 minutes Non Operating Shock: ...

Qlogic SANbox-16HA Installer's/ Installer’s/User’s Manual 59005-03 Rev. A Multi-Chassis Fabrics 5-11 Mesh Zoning Sanbox Switch chassis support fabric-wide zones for all zone types. Broadcast Zones and Name Server Zones require no special consideration in a mesh fabric. That is, you may assign these zones by port or by device ...

Qlogic SANbox-16HA Installer's/ SANbox-16HA Fibre Channel Switch 1-10 General Description 59005-03 Rev. A Installer’s/User’s Manual • Each chassis has two separate AC power inputs, one for each power supply. The left AC power input provides input power to the left power supply. The right AC power input provides input power to the right power ...

Qlogic SANbox-16HA Installer's/ Eden Prairie, MN 55346 (952) 932-4000 Release Number 03, Revision A ( August, 2000) The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law: THIS PUBLICATION is printed “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, ...

Qlogic SANbox-16HA Installer's/ Installer’s/User’s Manual 59005-03 Rev. A Installation 2-1 Section 2 Installation Introduction There are nine basic steps required to install the Switch. 1. Unpack 2. Place or Mount the Equipment 3. Apply the IEC Laser Safety Label (If the installation contains fiber optic GBICs and is in Europe) 4. Install ...

Qlogic SANbox-16HA Installer's/ SANbox-16HA Fibre Channel Switch Installer’s/User’s Manual 59005-03 Rev. A General Description 1-13 Name Server Zoning by World Wide Name Name server zoning by world wide name (WWN) allows the division of the fabric into as many as 256 zones that define which devices receive Name Server information. A part ...

Qlogic SANbox-16HA Installer's/ SANbox-16HA Fibre Channel Switch Installer’s/User’s Manual 59005-03 Rev. A Reference Information A-9 Figure A-1 SANbox-16HA Switch Front/Back Dimensions in Millimeters (Inches) 444.5 (17.5") 85.34 (3.36") 17.78 (.7") 2 4 6 8 10 12 14 16 1 3 5 7 9 11 13 15 Rx Tx Rx Tx Front Back ...

Qlogic SANbox-16HA Installer's/ Installer’s/User’s Manual 59005-03 Rev. A Reference Information A-1 Appendix A Reference Information Appendix A contains the specifications for the SANbox-16 Fibre Channel Switch. Refer to “Fibre Channel Ports” on page 1-17 for the location of all connections, switches, and components. QLogic Customer S ...

Qlogic SANbox-16HA Installer's/ 3-8 Diagnostics/Troubleshooting 59005-03 Rev. A Installer’s/User’s Manual • Switch Management port logic • Arbitrated Loop tests Heartbeat LED Blink Patterns Normal (all pass) If all POST diagnostics pass, the Switch will go to normal operation and the Heart- beat LED will blink ...

2 Preface 59005-03 Rev. A Installer’s/User’s Manual Related Materials The following manuals and materials are referenced in the text and/or provide additional information. • Switch Management Installer’s/User’s Manual, Publication Number 59010. Available from QLogic Corporation. • Fibre Channel-Arbitr ...