Furuno FE-700 Operator's Manual

operation. If you cannot restore normal operation, contact your dealer. SYMPTOM PROBABLE CAUSES REMEDY Low power supply Check the supply voltage. Fuse blown Replace the fuse. No picture; no reading measure Power cable damaged Check the cab ...

Furuno FE-700 All operation of the FE-700 is carried out with the controls on the front panel of the display unit. Rotary controls respond immediately to your command but some touch keys require the successive operation. • • • ...

Thank you for purchasing this navigational echo sounder. We are confident you will discover why FURUNO has become synonymous with quality and reliability. Dedicated in the design and manufacture of marine electronics equipment for over 60 years, FURUNO Electric Company has gained an unrivaled reputation as a world leader i ...

Furuno FE-700 The diagnostic test checks the ROM, RAM, color bar and keyboard for proper operation. 1. Turn on the power while pressing any key. Release the keys when the following display appears. EXTENSION MODE + : TRANSDUCER SETTING - : TEST ▲: CLEAR MEMORY ▼: DEMONSTRATION SELECT MODE 2. Press the [-] key. RANGE: 4 GAIN : 150 MODE : ...

Furuno FE-700 Do not open the cover. There are no user-serviceable parts inside. Refer any repair work to a qualified technician. WARNING NOTICE Do not apply paint, anti-corrosive sealant or contact spray to coating or plastic parts of the equipment. Those items contain organic solvents that can damage coating and plastic parts, especial ...

Furuno FE-700 PNL 02P6250 (Beneath) MAIN BOARD 02P6280 MAIN DISPLAY UNIT FE-701, INSIDE VIEW (SHIELD COVER REMOVED) ANLG 02P6281 HEATSINK CON 02P6283 ISOLATION TRANSFORMER INTERFACE MEM 02P6282 TB5 TB6 TB1 TB2 TB3 TB4 DISTRIBUTION BOX FE-702, INSIDE VIEW ...

Furuno FE-700 manual. Auto uses the time difference in ZDA (IEC 61162-1). In manual, it is necessary to enter the time difference in hours and minutes. SYSTEM MENU 2 MENU SELECT 1 2 3 TIME ADJUST INTERNAL EXTERNAL TIME DIFFERENCE AUTO MANUAL TIME DIFF HOUR 0 (0∼13) TIME DIFF MIN 0 (0∼59) TIME DIFF SIGN - , + 01 AUG 2009 ...

Furuno FE-700 $--GLL,llll.lll,a,yyyyy.yyy,a,hhmmss.ss,A,a*hh | | | | | | | | | | | | | | | +------- 6 | | | | | | +--------- 5 | | ...

1. Turning on: Press the POWER Switch. Self-test starts, showing the condition of the logic circuits. The program number is displayed. ROM: OK DRAM: OK SRAM: OK BATTERY: OK PROGRAM NO. 02522970xx 2. Select a mode with the MODE Selector. The NAV position of the selector is recommended for general use. Display color is amber by default but ...

Furuno FE-700 MB-504 (for 200B-8B) JB IEC 61162-1 EIA-232C IEC 61162-1 Navigation Device Navigation Device Personal Computer IEC 61162-1 JB TRANSDUCER SWITCH BOX EX-8 DIGITAL DEPTH INDICATOR FE-720 CONTACT CLOSURE Alarm Unit AU-12 : Standar ...

Furuno FE-700 2.1 Menu Overview The menu has several functions for advanced operation. 1. Select MENU with the MODE Selector. CLUTTER AUTO (0-16) INTERFERENCE REJECT OFF IR1 IR2 IR3 PICTURE ADVANCE SLOW FAST TREND INDICATOR OFF ON INTERVAL 5s 1min 2 min 1/2 : ...

Furuno FE-700 If the depth goes out of the correct display area, increase or decrease the range until the seabed appears near the center of the screen. Adjust the Range Control, and current range selection is shown in the range display window. RANGE 5 m In the AUTO mode, the range scale is automatically adjusted. See section 1.9 for details. 1.8 Gain ...