Sharp MX-M350U Operation Manual

●ADMINISTRATOR SETTINGS LIST ....................................................................................................3 ●USING THE ADMINISTRATOR SETTINGS.........................................................................................4 ●GENERAL SETTINGS .........................................................................................................................7 ●COPY SETTINGS............................................... ...

7-18 ■Batch printing All files in a folder that have the same user name and password can be printed at once. 1 Touch the [BATCH P.] key in the file list screen of document filing mode. To print all files of a specific type of job, touch the desired job tab. The files shown on that tab can be printed as a batch. 2 Touch the [USER NAME] key. 3 Touch the user name of the files that you wish to print by batch printing. 4 If a password has been established, touch the [PASSWORD] key. Enter the password with the numeric keys (5 to 8 digits) and touch the [OK] key. Only f ...

drum will cause dirty prints. 2.The fusing unit is extremely hot. Exercise care in this area. 3.Do not look directly at the light source. Doing so may damage your eyes. 4.Five adjusters are provided on all optional stand/paper drawer units. These adjusters should be lowered until they contact the floor. When moving the machine with the optional stand/paper drawer, be sure to raise the adjusters. Also, unlock the two casters at the front of the optional stand/paper drawer. After moving the machine, lower the four ...

automatic document feeder is used. A different type of paper can also be automatically added as an insert at specified pages. ●Covers/inserts can be disabled in the administrator settings (page 11 of the administrator settings guide). Example of adding covers Example of adding covers and inserts Example of adding inserts About the explanations of covers and inserts There are various ways of using covers and inserts. To keep the explanations si ...

machine is moved. 1.The machine should be installed near an accessible power outlet for easy connection. 2.Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Also make certain the outlet is properly grounded. ●For the power supply requirements, see the name plate on the back of the main unit. 3.Do not install your machine in areas that are: ●damp, humid, or very dusty ●exposed t ...

drum will cause dirty prints. 2.The fusing unit is extremely hot. Exercise care in this area. 3.Do not look directly at the light source. Doing so may damage your eyes. 4.Five adjusters are provided on all optional stand/paper drawer units. These adjusters should be lowered until they contact the floor. When moving the machine with the optional stand/paper drawer, be sure to raise the adjusters. Also, unlock the two casters at the front of the optional stand/paper drawer. After moving the machine, lower the four ...