Parasound HALO C I Addendum Owner's Manual

you hear must be properly synchronized. Since matching the picture with the sound is most noticeable when actors are speaking, it is often called Lip sync. Video signals may be delayed when they are pro- cessed within the DVD player, in an external line scalar, or in a High Definition TV. An example of ...

Parasound HALO C I 17 THX Ultra2 Before any home theatre component can be THX Ultra2 certified, it must incorporate all the features above and also pass a rigorous series of quality and performance tests. Only then can a product feature the THX Ultra2 logo, which is your guarantee that the Home Theatre products you purchase will give you superb p ...

Parasound HALO C I These features offer you new options and they include new menu settings. The settings are found in the Audio setup menu. To make settings in the Audio setup menu, you first press the Menu button on the front panel, or the MENU button on the remote handset. Press the v down cursor button or press the front panel Menu button until ...

Applies only to remotes that have been re-programmed with Discrete IR Zone Code software. Note: The following instructions do not apply to remote handsets that have not been re-programmed with Discrete IR Zone Codes. An unmodified remote will control the second zone the same way it did before the PLIIx/Lipsync software up ...

Parasound HALO C I matrix-encoded software? Processing of DTS content is an available option. While Dolby Pro Logic IIx technology is fully compatible with DTS and DTS-ES, whether a product supports them is, of course, dependent upon DSP capability and hardware design. 9. Does ...

Are your back channel speakers selected? If you have not yet selected Back channel speakers, press the MENU button on the remote (or the Menu button on the front panel) and go to the Speaker setup, Size setup menu page, > Back speakers. Dolby Pro Logic IIx Dolby Pro Logic IIx: This extends two channel or 5. ...

Parasound HALO C I 11 Bass Tone Frequency 140 Hz Treble Tone Frequency 10 kHz Bass Tone Frequency 80 Hz Treble Tone Frequency 6 kHz Bass Tone Frequency 110 Hz Treble Tone Frequency 8 kHz ...

Parasound HALO C I The upgraded Bass tone control offers you a choice of three frequencies where the bass tone control range is centered, 80 Hz, 110 Hz and 140 Hz. - 80 Hz setting: The Bass tone control will make the least noticeable impact on the low frequencies in your music and movies. Decreasing Bass at the 80 Hz setting can compensate for room reso ...

Parasound HALO C I website, with permission. 1. What is Dolby® Pro Logic® IIx? Dolby Pro Logic IIx is an extension of Dolby Pro Logic II technology. This highly sophisticated algo- rithm processes native stereo- and 5.1 channel material to produce 6.1 or 7.1 output channels. Dolby Pro ...

Parasound HALO C I The Bass and Treble tone controls now operate with a 96 kHz sampling rate to enable the highest possible resolution. Higher resolution lets you make tonal adjustments without sacrificing overall quality of sound and its ultimate det ...

Parasound HALO C I pressing the THX button switches only THX Cinema processing on or off. The C 2 front panel displays only “THX” for THX Cinema. More detailed information about THX Cinema may be found on page 16. Other THX Modes If the Direct mode is selected, which enables a 5.1 channel source to play in its native ...