Philips D700 Extended User Documentation

Your phone includes a telephone answering machine that records unanswered calls when it is on. By default, the answering machine is set to the [Answer & rec.] mode. You can also access the answering machine remotely and change the settings through the answering machine menu on the handset. The LED indicator on the base station lights up when the answer machine is on. Turn the answering machine on or off Through the handset 1 Select [Menu] > > [Answer mode], then press [OK] to confirm. 2 Select [Answer only]/[Answer & ...

3 2 Your phone 5 What is in the box 5 Overview of the phone 6 Overview of the base station 7 3 Main menu icons 8 4 Display icons 9 5 Get started 10 Connect the base station 10 Insert the supplied batteries 11 Attach the belt clip 11 Configure your phone (country dependent) 11 Change the remote access PIN/passcode 12 Charge the handset 12 Check the battery level 12 What is standby mode? 13 Check the signal strength 13 6 Calls 14 Make a call 14 Answer a call 14 End a call 15 Adjust the earpiece/speaker volume 15 Mute the microphone 15 Turn the ...

exception list You can select a contact to the exception list. When the contact who is added into the exception list calls you, the phone rings immediately even though you activate the silent mode. 1 Press or select [Menu] > . 2 Select a contact, then select [Option] > [Set exception]. 3 Press [On] to confirm. » » The setting is saved. Tip •• For further information on how to set the silent mode and exclude the contacts from silent mode, see the chapter 'Sound settings', section 'Silent mode'. ...

European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. When this logo is attached to a product, it means a financial contribution has been paid to the associated national recovery and recycling system. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into th ...

Hereby Philips Consumer Lifestyle, declares that the D700/D705 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c. philips.com. This product has been designed, tested and manufactured according the European R&TTE directive 1999/5/EC. Use GAP standard compliance The GAP standard guarantees that all DECT™ GAP handsets and base stations comply with a minimum operating standard irrespective of their make. The handset and base station are GAP complian ...

which sends an alert if the sound level exceeds the set limit. Caution •• Make sure that you do not leave the handset that has the active monitor in the baby room. •• Make sure the baby unit and the cord are always out of reach of the baby. •• Place the baby unit at least 1 meter/3 feet but not more than 2 meters/6 feet away from the baby. Activate/Deactivate the baby unit Select [Menu] > > [Activate], then press [OK] to confirm. » » The baby unit is activated. Tip •• If you have not set the parent unit, a n ...

In standby mode, the icons shown on the main screen tell you what features are available on your handset. Icon Descriptions When the handset is off the base station/charger, the bars indicate the battery level (from full to low). When the handset is on the base station/charger, the bars keep scrolling until charging is complete. The empty battery icon flashes and you hear an alert tone. The battery is low and needs recharging. The number of bars indicates the connection status between the handset and base station. The more bars are shown, the better the signal strength is ...